An LC Passive Wireless Gas Sensor Based on PANI/CNT Composite
Open Access
Abstract
This paper proposes a wireless passive gas sensor based on the principle of LC mutual coupling. After the acidification of the carbon nanotube (CNT), the in-situ polymerization of the aminobenzene monomers was conducted on the surface of the acidified CNT to form a sensitive material composed of a polyaniline/carbon nanotube (PANI/CNT) composite. The Advanced Design System (ADS) software was used for simulating and analyzing the designed structure, which obtained the various parameters of the structure. A lead-free aluminum paste was printed on an alumina ceramic substrate via the screen printing technique to form an inductor coil, before the gas sensitive material was applied to prepare a wireless passive gas sensor, consisting of a single-turn inductor and interdigitated electrodes on the base structure. Finally, an experimental platform was built to test the performance of the sensor. The sensitivity of the gas sensor is about 0.04 MHz/ppm in an atmosphere with a NH3 concentration of 300 ppm. The sensor was shown to have good repeatability and high stability over a long time period.Keywords
This publication has 25 references indexed in Scilit:
- Microwave flexible gas sensor based on polymer multi wall carbon nanotubes sensitive layerSensors and Actuators B: Chemical, 2017
- Doping effect on self-assembled films of polyaniline and carbon nanotube applied as ammonia gas sensorSensors and Actuators B: Chemical, 2017
- Flexible room temperature ammonia sensor based on polyanilineSensors and Actuators B: Chemical, 2017
- Gas sensors based on polyaniline/zinc oxide hybrid film for ammonia detection at room temperatureChemical Physics Letters, 2016
- A room temperature ammonia gas sensor based on cellulose/TiO 2 /PANI composite nanofibersColloids and Surfaces A: Physicochemical and Engineering Aspects, 2016
- Room temperature pH-dependent ammonia gas sensors using graphene quantum dotsSensors and Actuators B: Chemical, 2016
- MWCNT-conducting polymer composite based ammonia gas sensors: A new approach for complete recovery processSensors and Actuators B: Chemical, 2014
- Wireless sensing and identification based on radar cross section variability measurement of passive electromagnetic sensorsAnnals of Telecommunications, 2013
- Novel Microwave Gas Sensor using Dielectric Resonator With SnO2 Sensitive LayerProcedia Chemistry, 2009
- A gas nanosensor unaffected by humidityNanotechnology, 2009