Determining the patterns of extinguishing polar flammable liquids with a film-forming foaming agent
Open Access
- 30 June 2023
- journal article
- research article
- Published by Private Company Technology Center in Eastern-European Journal of Enterprise Technologies
- Vol. 3 (10 (123)) , 48-56
Abstract
An issue related to the use of foaming agents to extinguish fires involving flammable liquids is to ensure the efficiency of vapor insulation of flammable liquid and the foam stability during operation. Therefore, the object of research was a change in the insulating properties of the foaming agent film when interacting with a polar combustible substance. It has been proven that the presence of foaming agent on a flammable liquid leads to the formation of an insulating film on the surface resistant to the combustion temperature of the liquid, due to which re-ignition shifts towards longer time. A film of foaming agent was formed on the surface of the flammable liquid by leaking from the screen, which led to the insulation of the surface. The measured contact area of the foaming film with the electrode was more than 6.2·10-3 m2, which indicates the formation of a barrier for temperature, which collapses over time. According to experimental data on changes in electrical resistance, the critical contact area of the foaming film with the electrode was calculated, at which the film is destroyed. Based on the derived dependences, the change in the process of mass transfer of the foaming film to a flammable liquid was calculated, equal to about 800 s. The maximum possible mass transfer of the foaming agent into the flammable liquid and the reduction of insulation capacity were evaluated. The peculiarities of foam supply to the surface of alcohol through the screen are that the quenching time was about 156 s while the critical intensity of the supply of the working solution of the foaming agent was 0.054 dm3/(m2·s). And the time interval before re-ignition was about 470 s, which is enough to cool the fire site. Thus, there is reason to assert the possibility of targeted control over the processes of extinguishing polar flammable liquids with a foaming agentKeywords
This publication has 22 references indexed in Scilit:
- Preparation and characterization of fire-extinguishing efficiency of novel gel-protein foam for liquid pool firesEnergy, 2022
- Experimental Research on the Effectiveness of Different Types of Foam of Extinguishing Methanol / Diesel Pool FiresCombustion Science and Technology, 2022
- Different strategies of foam stabilization in the use of foam as a fracturing fluidAdvances in Colloid and Interface Science, 2020
- Spreading kinetics of fluorocarbon surfactants on several liquid fuels surfacesColloids and Surfaces A: Physicochemical and Engineering Aspects, 2020
- Experimental study on fire-extinguishing efficiency of protein foam in diesel pool fireCase Studies in Thermal Engineering, 2019
- Engineering Analysis2019
- Cationic–anionic fluorinated surfactant mixtures based on short fluorocarbon chains as potential aqueous film-forming foamJournal of Dispersion Science and Technology, 2018
- New classification of foaming agents for fire extinguishingMATEC Web of Conferences, 2018
- Influence of fuel on foam degradation for fluorinated and fluorine-free foamsColloids and Surfaces A: Physicochemical and Engineering Aspects, 2017
- Effect of Xanthan Gum on the Performance of Aqueous Film-Forming FoamJournal of Dispersion Science and Technology, 2015