Active Mixing of Reactive Materials for 3D Printing
- 15 May 2019
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 21 (8)
Abstract
The mixing of materials during additive manufacturing is a major benefit which allows one to compositionally and spatially tailor material properties, for example to locally control the reactivity in fuel–oxidizer systems known as thermites. This work characterizes an active mixing printhead used in conjunction with a 3D printing process known as Direct Ink Writing. Besides compositional control, a major benefit of this approach is that it offers a safe method for working with these materials, which can otherwise be hazardous once mixed. Custom fuel and oxidizer inks are fed at fixed volumetric rates into an active mixing printhead, and both the rotational speed of the mixing impeller as well as the fuel–oxidizer ratio are varied. Upon ignition, the propagation speed increases with the rotational speed of the mixer and plateaus above a critical value of ≈750 rpm. The critical mixing speed is corroborated by computational fluid simulations and an analytical expression that considers the inks’ complex fluid behavior. Additionally, varying the composition results in a wide range of propagation speeds with peak reactivity corresponding to a fuel‐rich formulation (ϕ = 1.5). A test article incorporating a fast‐ and slow‐burning region demonstrates how spatial composition can manipulate the reactivity.Keywords
Funding Information
- Lawrence Livermore National Laboratory (16‐ERD‐040 LLNL‐JRNL‐765043)
This publication has 38 references indexed in Scilit:
- Photocurable Liquid Core–Fugitive Shell Printing of Optical WaveguidesAdvanced Materials, 2011
- Development of Highly Active Titania-Based Nanoparticles for Energetic MaterialsThe Journal of Physical Chemistry C, 2011
- Conformal Printing of Electrically Small Antennas on Three‐Dimensional SurfacesAdvanced Materials, 2011
- Infochemistry and infofuses for the chemical storage and transmission of coded informationProceedings of the National Academy of Sciences, 2009
- Direct Ink Writing of 3D Functional MaterialsAdvanced Functional Materials, 2006
- Effect of polymorphic phase transformations in alumina layer on ignition of aluminium particlesCombustion Theory and Modelling, 2006
- Ultrasonic metamaterials with negative modulusNature Materials, 2006
- Mixing of complex fluids with flat-bladed impellers: effect of impeller geometry and highly shear-thinning behaviorChemical Engineering and Processing - Process Intensification, 2004
- Size-Controlled Growth of CdSe Nanocrystals in Microfluidic ReactorsNano Letters, 2003
- Design and properties of co-continuous nanostructured polymers by reactive blendingNature Materials, 2002