Comparative Study of the Impurity Effect on SnAgCu and SnZn Solder Joints with Electrodeposited Cu
Open Access
Abstract
Sn-3Ag-0.5Cu (SAC305)- and Sn-9Zn-based alloys (Sn-Zn-X, X = Al, In) are lead-free solders used in the fabrication of solder joints with Cu metallization. Electroplating is a facile technology used to fabricate Cu metallization. However, the addition of functional additive molecules in the plating solution may result in impurity residues in the Cu electroplated layer, causing damage to the solder joints. This study investigates the impurity effect on solder joints constructed by joining various solder alloys to the Cu electroplated layers. Functional additives are formulated to fabricate high-impurity and low-impurity Cu electroplated samples. The as-joined solder joint samples are thermally aged at 120 °C and 170 °C to explore the interfacial reactions between solder alloys and Cu. The results show that the impurity effect on the interfacial reactions between SAC305 and Cu is significant. Voids are massively formed at the SAC305/Cu interface incorporated with a high impurity content, and the Cu6Sn5 intermetallic compound (IMC) grows at a faster rate. In contrast, the growth of the Cu5Zn8 IMC formed in the SnZn-based solder joints is not significantly influenced by the impurity content in the Cu electroplated layers. Voids are not observed in the SnZn-based solder joints regardless of the impurity content, indicative of an insignificant impurity effect. The discrepancy of the impurity effect is rationalized by the differences in the IMC formation and associated atomic interdiffusion in the SAC305- and SnZn-based solder joints.Keywords
Funding Information
- National Science and Technology Council (NSTC 110-2221-E-005-006-MY3)
This publication has 52 references indexed in Scilit:
- Exploring mechanism of suppressing void formation at Interface of Sn–9Zn and CuJournal of Materials Science: Materials in Electronics, 2024
- Supplemental Literature Review of Binary Phase Diagrams: Ag-Ni, Ag-Zr, Au-Bi, B-Ni, Co-Sb, Cu-Mn, Cu-Si, Cu-Zn, Fe-Zr, Li-Sb, Mg-Pu, and Si-ZrJournal of Phase Equilibria and Diffusion, 2017
- Bifurcation of the Kirkendall marker plane and the role of Ni and other impurities on the growth of Kirkendall voids in the Cu–Sn systemActa Materialia, 2017
- Influence of Poly(ethylene glycol) Degradation on Voiding Sporadically Occurring in Solder Joints with Electroplated CuJournal of Electronic Materials, 2012
- Toward a Better Understanding of the Effect of Cu Electroplating Process Parameters on Cu3Sn VoidingJournal of Electronic Materials, 2011
- Effects of residual S on Kirkendall void formation at Cu/Sn–3.5Ag solder jointsActa Materialia, 2008
- Morphology of intermetallic compounds formed between lead-free Sn-Zn based solders and Cu substratesJournal of Electronic Materials, 2006
- Interfacial reaction issues for lead-free electronic soldersJournal of Materials Science: Materials in Electronics, 2006
- The formation and growth of intermetallic compounds in Sn-Zn and Sn-Zn-Al solder with Ni/Au surface finish bond padJournal of Electronic Materials, 2006
- New lead-free, Sn-Zn-In solder alloysJournal of Electronic Materials, 1994