Yee-Wen Yen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yee-Wen Yen has a total of 105 co-authors. Here are the top co-authors by number of shared publications:
Hsien-Ming Hsiao
National Atomic Research Institute, Taoyuan, Taiwan, ROC
9 shared publications- Andromeda Dwi Laksono
Institut Teknologi Kalimantan
8 shared publications - Chih-Ming Chen
Department of Chemical Engineering, National Chung Hsing University, Taichung 402, Taiwan
7 shared publications Chiapyng Lee
Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 106, Taiwan, ROC
6 shared publicationsChien-Chung Jao
Department of Applied Technology of Living, Ta Hwa Institute of Technology, Hsinchu 30703, Taiwan, ROC
5 shared publicationsWei-Kai Liou
Department of Chemical and Materials Engineering, Lunghwa University of Science and Technology, Taoyuan County 33306, Taiwan, Republic of China
4 shared publications
Latest Publications
- Open Access
- 22 April 2026
- Published by Springer Nature in JOM
- Vol. 78 (6) , 5253-5263
Interfacial Reactions Between Ni-Electroplated Cu- 2.35 wt%Fe Alloy (C194) and Molten Sn Solder
- 22 April 2026
- Published by Springer Nature in JOM
- Vol. 78 (6) , 5253-5263
Open AccessInterfacial Reactions Between Ni-Electroplated Cu- 2.35 wt%Fe Alloy (C194) and Molten Sn Solder
- Open Access
- 16 March 2026
- Published by Springer Nature in Journal of Phase Equilibria and Diffusion
- Vol. 47 (2) , 185-192
Phase Equilibria of the Cu-Sn-Ti Ternary System at 450 °C
- 16 March 2026
- Published by Springer Nature in Journal of Phase Equilibria and Diffusion
- Vol. 47 (2) , 185-192
Open AccessPhase Equilibria of the Cu-Sn-Ti Ternary System at 450 °C
- 19 December 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (2) , 1635-1647
Liquid/Solid Interfacial Reactions Between Lead-Free Solders and Cu-6.01wt.% Sn-0.12wt.%P Alloy
- 19 December 2025
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 55 (2) , 1635-1647
Liquid/Solid Interfacial Reactions Between Lead-Free Solders and Cu-6.01wt.% Sn-0.12wt.%P Alloy
- Open Access
- 11 June 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (16) , 1-14
Liquid/solid interfacial reactions between lead-free solders and Cu–Ni–Si–Mg alloy (C7025)
- 11 June 2025
- Published by Springer Nature in Journal of Materials Science: Materials in Electronics
- Vol. 36 (16) , 1-14
Open AccessLiquid/solid interfacial reactions between lead-free solders and Cu–Ni–Si–Mg alloy (C7025)
- Open Access
Comparative Study of the Impurity Effect on SnAgCu and SnZn Solder Joints with Electrodeposited Cu
Sn-3Ag-0.5Cu (SAC305)- and Sn-9Zn-based alloys (Sn-Zn-X, X = Al, In) are lead-free solders used in the fabrication of solder joints with Cu metallization. Electroplating is a facile technology used to fabricate Cu metallization. However, the addition of functional additive molecules in the plating solution may result in impurity residues in the Cu electroplated layer, causing damage to the solder joints. This study investigates the impurity effect on solder joints constructed by joining various solder alloys to the Cu electroplated layers. Functional additives are formulated to fabricate high-impurity and low-impurity Cu electroplated samples. The as-joined solder joint samples are thermally aged at 120 °C and 170 °C to explore the interfacial reactions between solder alloys and Cu. The results show that the impurity effect on the interfacial reactions between SAC305 and Cu is significant. Voids are massively formed at the SAC305/Cu interface incorporated with a high impurity content, and the Cu6Sn5 intermetallic compound (IMC) grows at a faster rate. In contrast, the growth of the Cu5Zn8 IMC formed in the SnZn-based solder joints is not significantly influenced by the impurity content in the Cu electroplated layers. Voids are not observed in the SnZn-based solder joints regardless of the impurity content, indicative of an insignificant impurity effect. The discrepancy of the impurity effect is rationalized by the differences in the IMC formation and associated atomic interdiffusion in the SAC305- and SnZn-based solder joints.
Open AccessComparative Study of the Impurity Effect on SnAgCu and SnZn Solder Joints with Electrodeposited Cu
Sn-3Ag-0.5Cu (SAC305)- and Sn-9Zn-based alloys (Sn-Zn-X, X = Al, In) are lead-free solders used in the fabrication of solder joints with Cu metallization. Electroplating is a facile technology used to fabricate Cu metallization. However, the addition of functional additive molecules in the plating solution may result in impurity residues in the Cu electroplated layer, causing damage to the solder joints. This study investigates the impurity effect on solder joints constructed by joining various solder alloys to the Cu electroplated layers. Functional additives are formulated to fabricate high-impurity and low-impurity Cu electroplated samples. The as-joined solder joint samples are thermally aged at 120 °C and 170 °C to explore the interfacial reactions between solder alloys and Cu. The results show that the impurity effect on the interfacial reactions between SAC305 and Cu is significant. Voids are massively formed at the SAC305/Cu interface incorporated with a high impurity content, and the Cu6Sn5 intermetallic compound (IMC) grows at a faster rate. In contrast, the growth of the Cu5Zn8 IMC formed in the SnZn-based solder joints is not significantly influenced by the impurity content in the Cu electroplated layers. Voids are not observed in the SnZn-based solder joints regardless of the impurity content, indicative of an insignificant impurity effect. The discrepancy of the impurity effect is rationalized by the differences in the IMC formation and associated atomic interdiffusion in the SAC305- and SnZn-based solder joints.
- 15 February 2024
- Published by Springer Nature in JOM
- Vol. 76 (6) , 2754-2762
Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
- 15 February 2024
- Published by Springer Nature in JOM
- Vol. 76 (6) , 2754-2762
Dissolution Behavior of Cu-2.0 wt.% Be (Alloy 25) and Cu-0.1 wt.% Fe (C19210) Substrates in Molten Sn-9 wt.%Zn Solder
- 5 December 2023
- Published by Elsevier in Journal of the Taiwan Institute of Chemical Engineers
- Vol. 155
Solid/solid state interfacial reactions in the lead-free solders/Cu- 2.3%wt. Fe alloy (C194) couples
- 5 December 2023
- Published by Elsevier in Journal of the Taiwan Institute of Chemical Engineers
- Vol. 155
Solid/solid state interfacial reactions in the lead-free solders/Cu- 2.3%wt. Fe alloy (C194) couples
- Open Access
Phase Equilibria of the Ag-Al-Au Ternary System and Interfacial Reactions in the Au-xAg/Al Couples at 450 °C
The phase equilibria of the Ag-Al-Au ternary system and the solid-state reaction couple for the Au-xAg/Al system were investigated isothermally at 450 °C. By investigating the Ag-Al-Au ternary system and its isothermal section, this study aims to provide a clearer understanding of the phase stability and interfacial reactions between different phases. This information is crucial for designing materials and processes in electronic packaging, with the potential to reduce costs and improve reliability. There were seven single-phase regions, thirteen two-phase regions, and six three-phase regions, with no ternary intermetallic compound (IMC) formed in the isothermal section of the Ag-Al-Au ternary system. When the Au-25 wt.% Ag/Al couple was aged at 450 °C for 240–1500 h, the AuAl2, Au2Al, and Au4Al phases formed at the interface. When the Ag contents increased to 50 and 75 wt.%, the Ag2Al, AuAl2, and Au4Al phases formed at the interface. When the aging time increased from 240 h to 1500 h, the total IMC thickness in all Au-xAg/Al couples became thicker, but the types of IMCs formed at the interface did not change. The total IMC thickness also increased with the increase in the Ag content. When the Ag content was greater than 25 wt.%, the Au2Al phase was converted into the Ag2Al phase. The IMC growth mechanism in all of the couples followed a reaction-controlled process.
Open AccessPhase Equilibria of the Ag-Al-Au Ternary System and Interfacial Reactions in the Au-xAg/Al Couples at 450 °C
The phase equilibria of the Ag-Al-Au ternary system and the solid-state reaction couple for the Au-xAg/Al system were investigated isothermally at 450 °C. By investigating the Ag-Al-Au ternary system and its isothermal section, this study aims to provide a clearer understanding of the phase stability and interfacial reactions between different phases. This information is crucial for designing materials and processes in electronic packaging, with the potential to reduce costs and improve reliability. There were seven single-phase regions, thirteen two-phase regions, and six three-phase regions, with no ternary intermetallic compound (IMC) formed in the isothermal section of the Ag-Al-Au ternary system. When the Au-25 wt.% Ag/Al couple was aged at 450 °C for 240–1500 h, the AuAl2, Au2Al, and Au4Al phases formed at the interface. When the Ag contents increased to 50 and 75 wt.%, the Ag2Al, AuAl2, and Au4Al phases formed at the interface. When the aging time increased from 240 h to 1500 h, the total IMC thickness in all Au-xAg/Al couples became thicker, but the types of IMCs formed at the interface did not change. The total IMC thickness also increased with the increase in the Ag content. When the Ag content was greater than 25 wt.%, the Au2Al phase was converted into the Ag2Al phase. The IMC growth mechanism in all of the couples followed a reaction-controlled process.
- 25 April 2023
- Published by Springer Nature in JOM
- Vol. 75 (6) , 1889-1901
Solid/Solid State Interfacial Reactions in the Sn-9Zn/Cu-Based Alloys (C1990 HP, Alloy 25, and C194) Couples
- 25 April 2023
- Published by Springer Nature in JOM
- Vol. 75 (6) , 1889-1901
Solid/Solid State Interfacial Reactions in the Sn-9Zn/Cu-Based Alloys (C1990 HP, Alloy 25, and C194) Couples
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 61, 197-198
Development of High Temperature Lead-free Solders in the Al-95Zn + xSn Systems
The high-temperature lead-free solder alloys of Al-95Zn with the modification of the addition of Sn have been investigated. Its proportion is used to adjust the metallographic microstructure, solidified precipitate phase, and liquidus temperature of the solder alloy. The characterization results, such as scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), and differential scanning calorimeter (DSC), will be discussed in this study. The study results show that the Al-Sn-Zn-based alloy has (Zn)+β- Sn+(Al) precipitates when heat-treated at 900°C for 36 h. Its liquidus temperature of Al-95Zn + xSn is between 342-385°C, and increased Sn content will decrease its liquidus temperature.
- 19 April 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 61, 197-198
Development of High Temperature Lead-free Solders in the Al-95Zn + xSn Systems
The high-temperature lead-free solder alloys of Al-95Zn with the modification of the addition of Sn have been investigated. Its proportion is used to adjust the metallographic microstructure, solidified precipitate phase, and liquidus temperature of the solder alloy. The characterization results, such as scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray diffraction (XRD), and differential scanning calorimeter (DSC), will be discussed in this study. The study results show that the Al-Sn-Zn-based alloy has (Zn)+β- Sn+(Al) precipitates when heat-treated at 900°C for 36 h. Its liquidus temperature of Al-95Zn + xSn is between 342-385°C, and increased Sn content will decrease its liquidus temperature.