Conceptual design of a 15-TW pulsed-power accelerator for high-energy-density—physics experiments
Open Access
- 21 June 2017
- journal article
- research article
- Published by AIP Publishing in Matter and Radiation at Extremes
- Vol. 2 (4) , 204-223
Abstract
We have developed a conceptual design of a 15-TW pulsed-power accelerator based on the linear-transformer-driver (LTD) architecture described by Stygar [W. A. Stygar et al., Phys. Rev. ST Accel. Beams 18, 110401 (2015)]. The driver will allow multiple, high-energy-density experiments per day in a university environment and, at the same time, will enable both fundamental and integrated experiments that are scalable to larger facilities. In this design, many individual energy storage units (bricks), each composed of two capacitors and one switch, directly drive the target load without additional pulse compression. Ten LTD modules in parallel drive the load. Each module consists of 16 LTD cavities connected in series, where each cavity is powered by 22 bricks connected in parallel. This design stores up to 2.75 MJ and delivers up to 15 TW in 100 ns to the constant-impedance, water-insulated radial transmission lines. The transmission lines in turn deliver a peak current as high as 12.5 MA to the physics load. To maximize its experimental value and flexibility, the accelerator is coupled to a modern, multibeam laser facility (four beams with up to 5 kJ in 10 ns and one beam with up to 2.6 kJ in 100 ps or less) that can provide auxiliary heating of the physics load. The lasers also enable advanced diagnostic techniques such as X-ray Thomson scattering and multiframe and three-dimensional radiography. The coupled accelerator-laser facility will be the first of its kind and be capable of conducting unprecedented high-energy-density–physics experiments.Keywords
Funding Information
- Department of Energy National Nuclear Security Administration (DE-NA0001944)
- University of Rochester
- New York State Energy Research and Development Authority
This publication has 17 references indexed in Scilit:
- New low inductance gas switches for linear transformer driversPhysical Review Special Topics - Accelerators and Beams, 2010
- Energy loss due to eddy current in linear transformer driver coresPhysical Review Special Topics - Accelerators and Beams, 2010
- Pulsed-power-driven cylindrical liner implosions of laser preheated fuel magnetized with an axial fieldPhysics of Plasmas, 2010
- Low-inductance gas switches for linear transformer driversPhysical Review Special Topics - Accelerators and Beams, 2009
- Development and tests of fast 1-MA linear transformer driver stagesPhysical Review Special Topics - Accelerators and Beams, 2009
- 2 – 20 ns interframe time 2-frame 6.151keV x-ray imaging on the recently upgraded Z Accelerator: A progress reportReview of Scientific Instruments, 2008
- Water-dielectric-breakdown relation for the design of large-area multimegavolt pulsed-power systemsPhysical Review Special Topics - Accelerators and Beams, 2006
- Improved design of a high-voltage vacuum-insulator interfacePhysical Review Special Topics - Accelerators and Beams, 2005
- Z-Beamlet: a multikilojoule, terawatt-class laser systemApplied Optics, 2005
- Flashover of a vacuum-insulator interface: A statistical modelPhysical Review Special Topics - Accelerators and Beams, 2004