Transient liquid phase sintered attach for power electronics
Authors:
- 1 May 2013
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 05695503,p. 435-440
Abstract
Low temperature transient liquid phase sintering (LT-TLPS) pastes, based on copper-tin, have been developed for high temperature attachment of wide band gap semiconductor dice to substrates for power electronics. The LT-TLPS attach process enables pressure-less joining at low temperatures in air. An organic binder has been used to form a stencil-printable paste that prevents oxidation of the copper and tin particles, before and during sintering. Shear samples have been manufactured consisting of copper dummy dice and copper substrates joined with a stencil printed layer of one of three copper-tin sinter pastes (viz. Cu60Sn, Cu50Sn, and Cu40Sn) having copper concentrations of 40%, 50%, and 60% by weight respectively. A high-temperature shear test setup has been designed to determine the shear strength of the three pastes at temperatures of 25°C, 125°C, 250°C, 400°C, and 600°C. It has been shown that the joints remain strong up to the melting point of the dominant intermetallic phase of the joint. Cu50Sn joints showed no reduction in shear strength up to 400°C, while Cu40Sn pastes showed no reduction in shear strength up to 600°C. This demonstrates that pressure-less LT-TLPS pastes can be used to form high-temperature resilient joints at low process temperatures in reasonably short process times.Keywords
This publication has 11 references indexed in Scilit:
- Highly reliable nickel-tin transient liquid phase bonding technology for high temperature operational power electronics in electrified vehicles2012
- Temperature Cycling Reliability of High-Temperature Lead-Free Die-Attach TechnologiesIEEE Transactions on Device and Materials Reliability, 2011
- Au-Sn fluxless SLID bonding: Effect of bonding temperature for stability at high temperature, above 400 °C2010
- Transient Liquid Phase Die Attach for High-Temperature Silicon Carbide Power DevicesIEEE Transactions on Components and Packaging Technologies, 2010
- Migration of Sintered Nanosilver Die-Attach Material on Alumina Substrate Between 250 $^{\circ}\hbox{C}$ and 400 $^{ \circ}\hbox{C}$ in Dry AirIEEE Transactions on Device and Materials Reliability, 2010
- Silver-Indium Transient Liquid Phase Sintering for High Temperature Die AttachmentJournal of Microelectronics and Electronic Packaging, 2009
- Characterization of SiC Diodes in Extremely High Temperature Ambient2006
- Novel large area joining technique for improved power device performance2003
- A hybrid 6H-SiC temperature sensor operational from 25°C to 500°CIEEE Transactions on Components, Packaging, and Manufacturing Technology: Part A, 1996
- The Cu-Sn (Copper-Tin) systemBulletin of Alloy Phase Diagrams, 1990