Validation of Contact Measurement System for Wheelchair Tennis Propulsion Using Marker-Less Vision System
- 28 December 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 73 (00189456) , 1-10
Abstract
This study investigates the reliability of marker-less vision systems for contact detection between hand and hand-rim during wheelchair propulsion. The measurement system uses a camera collecting RGB and depth images. The hand is detected through Mediapipe, a software able to recognize the key points of the hand on the RGB image. Hand position is expressed with respect to the wheel. A classifier is used to determine if there is contact between hand and hand-rim. To validate this procedure, 17 able-bodied participants pushed the wheelchair on an ergometer during six tests, given by the combinations of holding a tennis racket in their right hand while propelling at three different speeds: 4 km/h, 5.4 km/h and maximal sprint. Since validated contact detection methods are lacking in literature, experts provided a reference by manually evaluating video recordings and force signals frame-by-frame. The results showed that the hand identification by Mediapipe is not influenced by the presence of the racket but by the speed. Contact events were detected in the 99.5% of the cases. The mean error in contact time detection was -5 ms for the starts and 18 ms for the ends, the standard deviation was 48 ms for both and the combined root mean square error (RMSE) was 48 ms for the starts and 50 ms for the ends. These values, once corrected the systematic effects, lead to a standard uncertainty of approximately 0.05 s, corresponding to 15 % of the average contact duration. The study highlights the potential use of marker-less vision systems for contact detection in wheelchair propulsion.Keywords
This publication has 35 references indexed in Scilit:
- Obtaining wheelchair kinematics with one sensor only? The trade-off between number of inertial sensors and accuracy for measuring wheelchair mobility performance in sportsJournal of Biomechanics, 2022
- Original article: Validity of measuring wheelchair kinematics using one inertial measurement unit during commonly used testing protocols in elite wheelchair court sportsJournal of Biomechanics, 2021
- The longitudinal relationship between shoulder pain and altered wheelchair propulsion biomechanics of manual wheelchair usersJournal of Biomechanics, 2021
- Three-dimensional cameras and skeleton pose tracking for physical function assessment: A review of uses, validity, current developments and Kinect alternativesGait & Posture, 2019
- Unmatched speed perceptions between overground and treadmill manual wheelchair propulsion in long-term manual wheelchair usersGait & Posture, 2018
- A Descriptive Study on the Influence of Wheelchair Design and Movement Trajectory on the Upper Limbs’ Joint AnglesAdvances in Intelligent Systems and Computing, 2017
- Impact of a Wheelchair Education Protocol Based on Practice Guidelines for Preservation of Upper-Limb Function: A Randomized TrialArchives of Physical Medicine and Rehabilitation, 2014
- Redefining the Manual Wheelchair Stroke Cycle: Identification and Impact of Nonpropulsive Pushrim ContactArchives of Physical Medicine and Rehabilitation, 2009
- Updating Formulae and a Pairwise Algorithm for Computing Sample Variances1982
- On Methods in the Analysis of Profile DataPsychometrika, 1959