Response of Ti microstructure in mechanical and laser forming processes
Open Access
- 9 July 2018
- journal article
- research article
- Published by Springer Nature in Journal of Materials Science
- Vol. 53 (20) , 14713-14728
Abstract
Microstructural deformation mechanisms present during three different forming processes in commercially pure Ti were analysed. Room temperature mechanical forming, laser beam forming and a combination of these two processes were applied to thick metal plates in order to achieve the same final shape. An electron backscatter diffraction technique was used to study the plate microstructure before and after applying the forming processes. Substantial differences among the main deformation mechanisms were clearly detected. In pure mechanical forming at room temperature, mechanical twinning predominates in both compression and tensile areas. A dislocation slip mechanism inside the compression and tensile area is characteristic of the pure laser forming process. Forming processes which subsequently combine the laser and mechanical approaches result in a combination of twinning and dislocation mechanisms. The Schmid factor at an individual grain level, the local temperature and the strain rate are factors that determine which deformation mechanism will prevail at the microscopic level. The final microstructures obtained after the different forming processes were applied are discussed from the point of view of their influence on the performance of the resulting formed product. The observations suggest that phase transformation in Ti is an additional microstructural factor that has to be considered during laser forming.Keywords
This publication has 29 references indexed in Scilit:
- Effect of microstructure on the nucleation of deformation twins in polycrystalline high-purity magnesium: A multi-scale modeling studyJournal of the Mechanics and Physics of Solids, 2011
- Modelling of laser forming – An reviewComputational Materials Science, 2009
- Modeling texture, twinning and hardening evolution during deformation of hexagonal materialsActa Materialia, 2007
- Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloyMaterials Science and Engineering: A, 2007
- Influence of material properties on the laser-forming process of sheet metalsJournal of Materials Processing Technology, 2005
- Experimental and numerical modeling of buckling instability of laser sheet formingInternational Journal of Machine Tools and Manufacture, 2002
- Laser bending of leadframe materialsJournal of Materials Processing Technology, 1998
- Extending Laser Bending for the Generation of Convex ShapesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 1995
- The laser bending of steel foils for microparts by the buckling mechanism-a modelModelling and Simulation in Materials Science and Engineering, 1995
- Cleavage deformation in zinc and sodium chlorideActa Metallurgica, 1953