Thermal Design of the Conduction-Cooled High Temperature Superconducting Magnet for Pulsating Magnetic Field
- 2 February 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 33 (5) , 1-7
Abstract
A conduction-cooled high temperature superconducting (HTS) solenoid is fabricated to produce pulsating 4 T magnetic field for magnetic refrigeration. HTS conductor of 245 m is wound as a solenoid with 112 layers each of which consists of 12 turns of the conductor. For a stable ramping operation of the magnet, AC loss inside the winding pack should be effectively rejected to the heat sink. The thermal drains are inserted between the layers and connected to the magnet flange which is cooled by a commercial two-stage Gifford-McMahon cooler. They are made of Oxygen-Free High Conductivity (OFHC) copper, and has a width of 6 mm and a thickness of 50 ${\rm{\mu }}$ m. Thermal analysis is conducted to confirm the effect of the thermal drain on the AC loss heat rejection. AC loss of the magnet is estimated by using T-A formulation (current vector potential T and magnetic vector potential A). The ramp rate of the magnet and the heat sink temperature are set to 0.1 T/s and 4.5 K, respectively. In the thermal diffusion calculation, each winding layer is considered as the lumped capacitance. In addition, thermal conduction between the adjacent layers and that through the thermal drains are considered. The thermal analysis confirms that the conductor temperature of the winding is maintained lower than the operating limit of 20 K. Based on the results of the thermal analysis, the stable pulsating operation of the conduction-cooled superconducting magnet is predicted to be feasible and is also confirmed by the experiment.Keywords
Funding Information
- National Research Foundation of Korea
- Ministry of Science and ICT, South Korea (2022M3I9A1073924)
- New Zealand Ministry of Business
- Innovation and Employment
- Advanced Energy Technology Platform program (RTVU2004)
This publication has 20 references indexed in Scilit:
- Degradation analysis of REBCO coilsSuperconductor Science and Technology, 2014
- Study of second generation, high-temperature superconducting coils: Determination of critical currentJournal of Applied Physics, 2012
- 50mK cooling solution with an ADR precooled by a sorption coolerCryogenics, 2010
- Development of a cryogen-free continuous ADR for the constellation-X missionCryogenics, 2004
- Ac loss properties of a 4 kJ conduction-cooled pulse coil wound with a Bi2223 6-strand parallel conductor for SMESIEEE Transactions on Applied Superconductivity, 2003
- Thermal conductivity of Kapton tapeCryogenics, 1999
- Thermal boundary resistance of mechanical contacts between solids at sub-ambient temperaturesJournal of Physics D: Applied Physics, 1999
- Quench propagation in high Tc superconductorsCryogenics, 1994
- Type-II-superconductor strip with current in a perpendicular magnetic fieldPhysical Review B, 1993
- Development of an adiabatic demagnetization refrigerator for SIRTFCryogenics, 1990