Effect of Annealing Temperature on the Microstructure and Mechanical Properties of High-Pressure Torsion-Produced 316LN Stainless Steel
Open Access
Abstract
316LN stainless steel is a prospective structural material for the nuclear and medical instruments industries. Severe plastic deformation (SPD) combined with annealing possesses have been used to create materials with excellent mechanical properties. In the present work, a series of ultrafine-grained (UFG) 316LN steels were produced by high-pressure torsion (HPT) and a subsequent annealing process. The effects of annealing temperature on grain recrystallization and precipitation were investigated. Recrystallized UFG 316LN steels can be achieved after annealing at high temperature. The σ phase generates, at grain boundaries, at an annealing temperature range of 750–850 °C. The dislocations induced by recrystallized grain boundaries and strain-induced nanotwins are beneficial for enhancing ductility. Moreover, microcracks are easy to nucleate at the σ phase and the γ-austenite interface, causing unexpected rapid fractures.Keywords
Funding Information
- National Natural Science Foundation of China (52075368, 51605325)
This publication has 44 references indexed in Scilit:
- Phase and structural transformations in corrosion-resistant steels upon high-pressure torsion and heatingRussian Metallurgy (Metally), 2012
- Effect of large strain cold rolling and subsequent annealing on microstructure and mechanical properties of an austenitic stainless steelMaterials Science and Engineering: A, 2012
- Overview of Intermetallic Sigma () Phase Precipitation in Stainless SteelsISRN Metallurgy, 2012
- Microstructures, strengthening mechanisms and fracture behavior of Cu–Ag alloys processed by high-pressure torsionActa Materialia, 2012
- Effect of reversion annealing on the formation of nano/ultrafine grained structure in 201 austenitic stainless steelMaterials Science and Engineering: A, 2011
- Microstructural evolution and mechanical properties of a two-phase Cu–Ag alloy processed by high-pressure torsion to ultrahigh strainsActa Materialia, 2011
- Effect of hydrogen on martensite formation in austenitic stainless steels in high-pressure torsionActa Materialia, 2009
- Recent developments in stainless steelsMaterials Science and Engineering: R: Reports, 2009
- Managing Both Strength and Ductility in Ultrafine Grained SteelsISIJ International, 2008
- The Innovation Potential of Bulk Nanostructured MaterialsAdvanced Engineering Materials, 2007