Evolution of secondary flow structures and loss mechanisms in a mixed-flow compressor under high-altitude low-Reynolds-number conditions
Authors:
- Shijun SunSSShijun Sun
- Xiao XieXXXiao Xie
- Wei LiuWLWei Liu
- 1 November 2026
- journal article
- Published by AIP Publishing in Physics of Fluids
- Vol. 38 (11)
Abstract
To clarify performance deterioration of mixed-flow compressors under high-altitude low-Reynolds-number conditions, a highly loaded mixed-flow compressor rotor is investigated by three-dimensional numerical simulations at altitudes of 0, 11, 15, and 20 km. The results show that, as the inlet Reynolds number decreases, the efficiency and total pressure ratio characteristics shift toward lower corrected mass flow rate, lower efficiency, and lower total pressure ratio. At the peak-efficiency operating points, the adiabatic efficiency at 20 km decreases by 4.2 percentage points, while the total pressure ratio decreases by 10.1%, compared with their corresponding values at 0 km. The loss mainly originates from two near-tip flow structures: the tip leakage vortex (TLV) on the splitter-blade suction side, formed by secondary leakage from the main-blade tip clearance, and the casing passage vortex (CPV) in the main-blade suction-side passage, formed by low-energy fluid migrating radially from the main-blade leading-edge separation region and then moving circumferentially near the casing. As the Reynolds number decreases, the tip leakage flow increases, raising the TLV loss. Meanwhile, delayed separation-induced transition moves the reattachment position downstream and enlarges the leading-edge separation region. More low-energy fluid is then involved in radial migration, which promotes CPV development and increases the main-blade suction-side passage loss. The streamwise-averaged normalized entropy-increase flux shows that TLV loss dominates at 0 km, whereas CPV loss exceeds TLV loss from 11 km onward and becomes the main loss source with increasing altitude.Funding Information
- National Natural Science Foundation of China (52006011)
- Beijing Institute of Technology Research Fund Program for Young Scholars (XSQD-202201002)
- Marine Power Research & Development Foundation of China
This publication has 29 references indexed in Scilit:
- Modeling of flow losses in low-Reynolds-number centrifugal compressor based on field synergy principleApplied Thermal Engineering, 2025
- Review on internal flow mechanism and control methods of axial flow compressor at low Reynolds numberChinese Journal of Aeronautics, 2024
- Investigation of Reynolds number effects on flow stability of a transonic compressor using a dynamic mode decomposition methodAerospace Science and Technology, 2024
- Understanding of tip clearance flow structure in high speed mixed flow compressorPropulsion and Power Research, 2023
- Vortex dynamics and entropy generation in separated transitional flow over a compressor blade at various incidence anglesChinese Journal of Aeronautics, 2022
- Large eddy simulation of the separated flow transition on the suction surface of a high subsonic compressor airfoilPhysics of Fluids, 2020
- Reynolds Number Corrections2018
- Separations and secondary structures due to unsteady flow in a curved pipeJournal of Fluid Mechanics, 2017
- Experimental and numerical investigation on compressor cascade flows with tip clearance at a low Reynolds number conditionJournal of Thermal Science, 2011
- Large-eddy simulation analysis of mechanisms for viscous losses in a turbomachinery tip-clearance flowJournal of Fluid Mechanics, 2007