Analysis and compensation of the rotor position offset error and time delay in field‐oriented‐controlled PMSM drives
Open Access
- 1 July 2020
- journal article
- research article
- Published by Institution of Engineering and Technology (IET) in IET Power Electronics
- Vol. 13 (9) , 1911-1918
Abstract
In high‐performance field‐oriented control of permanent magnet synchronous machines (PMSMs), an accurate rotor position is indispensable for the key roles in coordinate transformations. However, due to the rotor position offset error and the time delay in digital control systems, it is still challenging to obtain exact rotor position information. In this study, the influence of rotor position error on the control performance of a PMSM drive system is analysed first. Then, two novel compensation technologies, regulation and methods, are proposed to accurately compensate for the rotor position for both current and voltage coordinate transformations. The advantage of the proposed scheme is that even without any prior knowledge of the system delay, the rotor position offset and compensation time coefficients can also be precisely calculated. Parameter sensitivity analysis is carried out, and compensation criteria are also provided to improve the compensation accuracy. Experimental results on a 300 kW PMSM drive system demonstrate that compared to the results achieved with conventional methods, the compensation accuracies of the phase angles used for the current and voltage coordinate transformations are increased by and at 5000 r/min, respectively. Consequently, the control performance and stability margin of the system are efficiently improved.Keywords
This publication has 28 references indexed in Scilit:
- MTPA Fitting and Torque Estimation Technique Based on a New Flux-Linkage Model for Interior-Permanent-Magnet Synchronous MachinesIEEE Transactions on Industry Applications, 2017
- Effect of Position Sensor Error on the Performance of Permanent Magnet Machine DrivesIEEE Transactions on Industry Applications, 2017
- Fast Determination of Moment of Inertia of Permanent Magnet Synchronous Machine Drives for Design of Speed Loop RegulatorIEEE Transactions on Control Systems Technology, 2016
- A Novel Algorithm Based on Polynomial Approximations for an Efficient Error Compensation of Magnetic Analog Encoders in PMSMs for EVsIEEE Transactions on Industrial Electronics, 2016
- Improving Position Sensor Accuracy Through Spatial Harmonic Decoupling, and Sensor Scaling, Offset, and Orthogonality Correction Using Self-Commissioning MRAS MethodsIEEE Transactions on Industry Applications, 2015
- Sensorless initial rotor position identification for non‐salient permanent magnet synchronous motors based on dynamic reluctance differenceIET Power Electronics, 2014
- Sensorless Control for SPMSM With Concentrated Windings Using Multisignal Injection MethodIEEE Transactions on Industrial Electronics, 2014
- Optimized Design of Stationary Frame Three Phase AC Current RegulatorsIEEE Transactions on Power Electronics, 2009
- Identification of Machine Parameters of a Synchronous MotorIEEE Transactions on Industry Applications, 2005
- Digitally-implemented naturally sampled PWM suitable for multilevel converter controlIEEE Transactions on Power Electronics, 2003