Open Access
- 27 June 2025
- other
- Published by Copernicus GmbH
- Vol. 2025, 1-32
Abstract
To enhance observations of the Atmospheric Boundary Layer (ABL), the European Meteorological Network, EUMETNET, and the Aerosol, Clouds, and Trace Gases Research Infrastructure, ACTRIS, are currently collaborating to establish networks of MicroWave Radiometers (MWRs). MWRs can be used to derive thermodynamic profiles within the ABL. Understanding and assessing instrument uncertainties of state-of-the-art MWRs is therefore crucial for accurate observations and also data assimilation purposes. Some national weather services are currently exploring the potential of MWR networks to improve short-term weather forecasts. In this paper, we discuss uncertainties inherent to the MWR instrument itself, namely (1) radiometric noise, (2) long-term drifts and jumps, (3) calibration repeatability, (4) biases/systematic differences between instruments, and (5) radome degradation. These uncertainties are expressed in brightness temperatures. For state-of-the-art MWRs (here, Generation 5 Humidity and Temperature PROfiler HATPRO-Gen5), radiometric noise at ambient temperatures is a maximum of 0.32 K in the V-band but usually lower, especially near cold load temperature ranges in the K-band (≤ 0.11 K). Long-term drifts or jumps between calibrations, which are at least two months apart, are usually below 0.4 K in the K-band and 1.0 K in the V-band but can also be higher. Drifts do not follow a discernable timely pattern and are therefore not easily quantifiable in a meaningful way. Calibrating at least every six months is thus advised. Calibration repeatability is shown to be well under 0.16 K. Mean brightness temperature differences between two HATPRO-Gen5 instruments are shown to be as high as 0.15 K in the K-band and 0.58 K in the V-band at zenith viewing direction. The radome has significantly degraded due to weathering and needs to be replaced if, 10 min after a rain event, residual water on its surface still causes a temperature deviation of more than 2 K compared to a dry radome.Keywords
This publication has 33 references indexed in Scilit:
- Improving the representation of the atmospheric boundary layer by direct assimilation of ground‐based microwave radiometer observationsQuarterly Journal of the Royal Meteorological Society, 2024
- EUMETNET opens to microwave radiometers for operational thermodynamical profiling in Europe2021
- Towards the profiling of the atmospheric boundary layer at European scale—introducing the COST Action PROBEBulletin of Atmospheric Science and Technology, 2020
- Assimilation of humidity and temperature observations retrieved from ground‐based microwave radiometers into a convective‐scale NWP modelQuarterly Journal of the Royal Meteorological Society, 2016
- Calibrating ground‐based microwave radiometers: Uncertainty and driftsRadio Science, 2016
- Effect of off-zenith observations on reducing the impact of precipitation on ground-based microwave radiometer measurement accuracyAtmospheric Research, 2014
- Thermodynamic and liquid profiling during the 2010 Winter OlympicsAtmospheric Research, 2013
- A network suitable microwave radiometer for operational monitoring of the cloudy atmosphereAtmospheric Research, 2005
- Accuracy of cloud liquid water path from ground‐based microwave radiometry 1. Dependency on cloud model statisticsRadio Science, 2003
- Accuracy of cloud liquid water path from ground‐based microwave radiometry 2. Sensor accuracy and synergyRadio Science, 2003