DESIGN OF TRIBAND BANDSTOP FILTERS USING A STUB-LOADED STEPPED-IMPEDANCE RESONATOR
Open Access
- 1 January 2020
- journal article
- research article
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 90, 69-75
Abstract
A stub-loaded stepped-impedance resonator is proposed. Its input impedance is derived, and its resonant conditions are found. First order and second order triband bandstop filters are designed using this resonator. Simulations on both filters show that they generate three attenuation poles at 0.5, 1.2, and 2.1 GHz. The second order filter is also fabricated and characterized using a microwave vector network analyzer. Simulation and measurement results on the second order filter show good correlation.Keywords
This publication has 10 references indexed in Scilit:
- DESIGN OF TRIBAND BANDSTOP FILTER USING AN ASYMMETRICAL CROSS-SHAPED MICROSTRIP RESONATORProgress In Electromagnetics Research Letters, 2019
- Design and Fabrication of Tri-Stopband Bandstop Filters Using Cascaded and Multi-Armed MethodsAdvanced Electromagnetics, 2017
- A tri-band bandstop filter with sharp rejection and controllable bandstop frequencies2015
- Microstrip Triband Bandstop Fitler with Sharp Stop Band Skirts and Independently Controllable Second Stop Band ResponseThe Scientific World Journal, 2014
- Compact Tri-Band Bandpass and Bandstop Filters Based on Hilbert-Fork ResonatorsIEEE Microwave and Wireless Components Letters, 2013
- Design of dual-band bandstop filter with low frequency ratio2013
- DESIGN OF PLANAR DUAL AND TRIPLE NARROW-BAND BANDSTOP FILTERS WITH INDEPENDENTLY CONTROLLED STOPBANDS AND IMPROVED SPURIOUS RESPONSEProgress In Electromagnetics Research, 2012
- Compact Dual-Band Bandstop Filters Using Stepped-Impedance ResonatorsIEEE Microwave and Wireless Components Letters, 2007
- Wideband frequency-domain characterization of FR-4 and time-domain causalityIEEE Transactions on Electromagnetic Compatibility, 2001
- Microstrip Filters for RF/Microwave Applications2001