Satilmis Budak
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Satilmis Budak has a total of 72 co-authors. Here are the top co-authors by number of shared publications:
C. Muntele
Cygnus Scientific Services
7 shared publications- Daryush Ila
Center for Irradiation of Materials, Department of Physics, Alabama A&M University, Normal, AL 35762 USA
7 shared publications - Claudiu Muntele
Alabama A&M University, Center for Irradiation of Materials, Normal, Alabama, United States
6 shared publications - Cydale Smith
Alabama A&M University, Center for Irradiation of Materials, Normal, Alabama, United States
5 shared publications - Kaveh Heidary
Department of Electrical Engineering and Computer Science Alabama A&M University 35811 Huntsville AL
5 shared publications - D. Ila
Alabama A&M University, Center for Irradiation of Materials, Normal, Alabama, United States
4 shared publications
Latest Publications
- Open Access
Fano Resonance in Ion-Bombarded Au-SiO2 Nanocomposites: Analysis of Mode Coupling and Optical Properties
This study investigates the optical properties of ion-bombarded Au-SiO2 nanocomposites, focusing on the enhanced Fano resonance observed in these samples. The formation of nanocrystals and nanocavities due to ion bombardment leads to significant interactions between plasmonic and vibrational modes, resulting in pronounced Fano resonance in the strong coupling regime. The study aims to explain the closer spacing of modes, the elevated baseline absorbance, and the asymmetric lineshape observed in the ion-bombarded samples. A detailed analysis is provided, comparing these findings with other sample preparations, such as Au-coated SiO2 and 20 nm Au colloidal on SiO2. The implications of these results for understanding plasmonic behavior and their potential applications in nanophotonics are discussed.
Open AccessFano Resonance in Ion-Bombarded Au-SiO2 Nanocomposites: Analysis of Mode Coupling and Optical Properties
This study investigates the optical properties of ion-bombarded Au-SiO2 nanocomposites, focusing on the enhanced Fano resonance observed in these samples. The formation of nanocrystals and nanocavities due to ion bombardment leads to significant interactions between plasmonic and vibrational modes, resulting in pronounced Fano resonance in the strong coupling regime. The study aims to explain the closer spacing of modes, the elevated baseline absorbance, and the asymmetric lineshape observed in the ion-bombarded samples. A detailed analysis is provided, comparing these findings with other sample preparations, such as Au-coated SiO2 and 20 nm Au colloidal on SiO2. The implications of these results for understanding plasmonic behavior and their potential applications in nanophotonics are discussed.
- Open Access
- 12 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Modulating Phononic Landscapes: The Role of Silicon Ion Bombardment in TailoringSi/Si+Ge and SiO2/SiO2+Ge Superlattices for Advanced Neutron SuperreflectorApplications
This study examines the impact of silicon ion bombardment on the phononic properties of Si/Si+Ge and SiO2/SiO2+Ge superlattices to enhance neutron superreflector technology. Using precise ion implantation and Fourier Transform Infrared Spectroscopy, we observed alterations in transverse and longitudinal optical phonon modes. The Si/Si+Ge system showed significant redshifts and intensity changes, while SiO2/SiO2+Ge exhibited increased lattice disorder and peak broadening. These findings underscore ion bombardment's potential to optimize phononic landscapes for improved nuclear reactor safety and efficiency through advanced phonon engineering.
- 12 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessModulating Phononic Landscapes: The Role of Silicon Ion Bombardment in TailoringSi/Si+Ge and SiO2/SiO2+Ge Superlattices for Advanced Neutron SuperreflectorApplications
This study examines the impact of silicon ion bombardment on the phononic properties of Si/Si+Ge and SiO2/SiO2+Ge superlattices to enhance neutron superreflector technology. Using precise ion implantation and Fourier Transform Infrared Spectroscopy, we observed alterations in transverse and longitudinal optical phonon modes. The Si/Si+Ge system showed significant redshifts and intensity changes, while SiO2/SiO2+Ge exhibited increased lattice disorder and peak broadening. These findings underscore ion bombardment's potential to optimize phononic landscapes for improved nuclear reactor safety and efficiency through advanced phonon engineering.
- Open Access
- 12 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Fano Resonance in Ion-Bombarded Au-SiO2 Nanocomposites: Analysis of ModeCoupling and Optical Properties
This study investigates the optical properties of ion-bombarded Au-SiO2 nanocomposites, focusing on the enhanced Fano resonance observed in these samples. The formation of nanocrystals and nanocavities due to ion bombardment leads to significant interactions between plasmonic and vibrational modes, resulting in pronounced Fano resonance in the strong coupling regime. The study aims to explain the closer spacing of modes, the elevated baseline absorbance, and the asymmetric lineshape observed in the ion-bombarded samples. A detailed analysis is provided, comparing these findings with other sample preparations, such as Au-coated SiO2 and 20 nm Au colloidal on SiO2. The implications of these results for understanding plasmonic behavior and their potential applications in nanophotonics are discussed
- 12 July 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessFano Resonance in Ion-Bombarded Au-SiO2 Nanocomposites: Analysis of ModeCoupling and Optical Properties
This study investigates the optical properties of ion-bombarded Au-SiO2 nanocomposites, focusing on the enhanced Fano resonance observed in these samples. The formation of nanocrystals and nanocavities due to ion bombardment leads to significant interactions between plasmonic and vibrational modes, resulting in pronounced Fano resonance in the strong coupling regime. The study aims to explain the closer spacing of modes, the elevated baseline absorbance, and the asymmetric lineshape observed in the ion-bombarded samples. A detailed analysis is provided, comparing these findings with other sample preparations, such as Au-coated SiO2 and 20 nm Au colloidal on SiO2. The implications of these results for understanding plasmonic behavior and their potential applications in nanophotonics are discussed
- Open Access
- 1 April 2020
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 13 (4) , 668-682
Thermal Treatment Effects on the Thermoelectric Properties of Ni/Si/Si + Sb/Si/Si + Ge/Ni Multilayer Thin Films
The multilayer thermoelectric devices including Ni/200 layers of Si/Si + Sb/200 layers of Si/Si + Ge/Ni thin films were fabricated using electron beam and DC/RF magnetron sputtering deposition systems. The thickness measurements have been performed using Filmetrics UV thickness measurement system. The Au contacts at the bottom and top of the fabricated thermoelectric devices were measured as 100 nm for each side. Ni layer at the bottom is 108 nm and Ni layer at the top of the multilayer structures is 168 nm. The thickness of 200 layers of Si/Si + Ge thin film is 173 nm and the thickness of 200 layers of Si/Si + Sb thin film is 199 nm. The fabricated thermoelectric devices have total of 402 layers of thin films with the total thickness of 648 nm thickness excluding two Au contact layers. The prepared thin film devices were annealed at different temperatures for one hour to improve the thermoelectric properties. The current studied system has reached some remarkable values of Seebeck coefficients when the suitable annealing temperatures and the suitable operating temperatures of Seebeck measurement system were applied. The multilayer thin film system has reached the Seebeck coefficient of -344.8 μV/K when the annealed temperature was 100°C and the operating temperature was 320 K. One of the main problems with the thermoelectric devices is having higher temperature dissipation during the operation of the devices. Ni thin film was used in the fabrication process to remove excess of the heat as a heat sink from the thermoelectric devices. This will bring new approach for the high efficient thermoelectric devices. The goal of the manuscript is to improve the thermoelectric properties of the fabricated thin film thermoelectric devices using Ni thin films and the thermal treatment. The resistivity values decreased when the annealing temperatures increased. The highest power factor values were reached when the thermoelectric devices were annealed at 100°C. Mobility values increased when the suitable temperatures were applied for thermal treatment.
- 1 April 2020
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 13 (4) , 668-682
Open AccessThermal Treatment Effects on the Thermoelectric Properties of Ni/Si/Si + Sb/Si/Si + Ge/Ni Multilayer Thin Films
The multilayer thermoelectric devices including Ni/200 layers of Si/Si + Sb/200 layers of Si/Si + Ge/Ni thin films were fabricated using electron beam and DC/RF magnetron sputtering deposition systems. The thickness measurements have been performed using Filmetrics UV thickness measurement system. The Au contacts at the bottom and top of the fabricated thermoelectric devices were measured as 100 nm for each side. Ni layer at the bottom is 108 nm and Ni layer at the top of the multilayer structures is 168 nm. The thickness of 200 layers of Si/Si + Ge thin film is 173 nm and the thickness of 200 layers of Si/Si + Sb thin film is 199 nm. The fabricated thermoelectric devices have total of 402 layers of thin films with the total thickness of 648 nm thickness excluding two Au contact layers. The prepared thin film devices were annealed at different temperatures for one hour to improve the thermoelectric properties. The current studied system has reached some remarkable values of Seebeck coefficients when the suitable annealing temperatures and the suitable operating temperatures of Seebeck measurement system were applied. The multilayer thin film system has reached the Seebeck coefficient of -344.8 μV/K when the annealed temperature was 100°C and the operating temperature was 320 K. One of the main problems with the thermoelectric devices is having higher temperature dissipation during the operation of the devices. Ni thin film was used in the fabrication process to remove excess of the heat as a heat sink from the thermoelectric devices. This will bring new approach for the high efficient thermoelectric devices. The goal of the manuscript is to improve the thermoelectric properties of the fabricated thin film thermoelectric devices using Ni thin films and the thermal treatment. The resistivity values decreased when the annealing temperatures increased. The highest power factor values were reached when the thermoelectric devices were annealed at 100°C. Mobility values increased when the suitable temperatures were applied for thermal treatment.
- Open Access
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 90, 69-75
DESIGN OF TRIBAND BANDSTOP FILTERS USING A STUB-LOADED STEPPED-IMPEDANCE RESONATOR
A stub-loaded stepped-impedance resonator is proposed. Its input impedance is derived, and its resonant conditions are found. First order and second order triband bandstop filters are designed using this resonator. Simulations on both filters show that they generate three attenuation poles at 0.5, 1.2, and 2.1 GHz. The second order filter is also fabricated and characterized using a microwave vector network analyzer. Simulation and measurement results on the second order filter show good correlation.
- 1 January 2020
- Published by The Electromagnetics Academy in Progress In Electromagnetics Research Letters
- Vol. 90, 69-75
Open AccessDESIGN OF TRIBAND BANDSTOP FILTERS USING A STUB-LOADED STEPPED-IMPEDANCE RESONATOR
A stub-loaded stepped-impedance resonator is proposed. Its input impedance is derived, and its resonant conditions are found. First order and second order triband bandstop filters are designed using this resonator. Simulations on both filters show that they generate three attenuation poles at 0.5, 1.2, and 2.1 GHz. The second order filter is also fabricated and characterized using a microwave vector network analyzer. Simulation and measurement results on the second order filter show good correlation.
- Open Access
- 1 August 2019
- Published by Science Publications in American Journal of Applied Sciences
- Vol. 16 (8) , 225-237
Thermoelectric and Optical Properties of Advanced Thermoelectric Devices from Different Multilayer Thin Films
Thermoelectric devices were prepared using different multilayered thin film structures in the order of Ge/Si+Ge, Si+Ge, Si, Sb+Ge, Ge and SiO2/SiO2+Ge by DC/RF Magnetron Sputtering. The thickness of the deposited thin films were measured using Filmetrics UV thickness measurement system. The prepared thermoelectric devices have been modified with 5 MeV Si ions bombardments at the different fluences (doses) using Pelletron high energy beam accelerator at Alabama A and M University to form quantum structures in the multilayer thin films to improve the efficiency of the thermoelectric devices. The conductivity measurements, the fluence dependence of the power factor measurements, the fluence dependence of thermal conductivity measurements and the figure of merit calculations of multilayered thin films at room temperature have been performed. After the thermoelectric devices were prepared, X-ray Diffraction, Scanning Electron Microscopy (SEM) + Energy-Dispersive X-beam Spectroscopy (EDS) and Scanning Transmission Electron Microscopy (TEM) measurements have been done from the cross section of the prepared multilayer thin films to give us some answer for the thickness of the fabricated thermoelectric devices.
- 1 August 2019
- Published by Science Publications in American Journal of Applied Sciences
- Vol. 16 (8) , 225-237
Open AccessThermoelectric and Optical Properties of Advanced Thermoelectric Devices from Different Multilayer Thin Films
Thermoelectric devices were prepared using different multilayered thin film structures in the order of Ge/Si+Ge, Si+Ge, Si, Sb+Ge, Ge and SiO2/SiO2+Ge by DC/RF Magnetron Sputtering. The thickness of the deposited thin films were measured using Filmetrics UV thickness measurement system. The prepared thermoelectric devices have been modified with 5 MeV Si ions bombardments at the different fluences (doses) using Pelletron high energy beam accelerator at Alabama A and M University to form quantum structures in the multilayer thin films to improve the efficiency of the thermoelectric devices. The conductivity measurements, the fluence dependence of the power factor measurements, the fluence dependence of thermal conductivity measurements and the figure of merit calculations of multilayered thin films at room temperature have been performed. After the thermoelectric devices were prepared, X-ray Diffraction, Scanning Electron Microscopy (SEM) + Energy-Dispersive X-beam Spectroscopy (EDS) and Scanning Transmission Electron Microscopy (TEM) measurements have been done from the cross section of the prepared multilayer thin films to give us some answer for the thickness of the fabricated thermoelectric devices.
- Open Access
- 1 September 2017
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 35 (5) , 051401
Thermoelectric and optical properties of advanced thermoelectric devices from Ni/Bi2Te3/Ni and Ni/Sb2Te3/Ni thin films
Thermoelectric devices were prepared from Ni/Bi2Te3/Ni and Ni/Sb2Te3/Ni thin films using both direct current/radio-frequency magnetron sputtering and E-beam deposition systems. Thermoelectric thin film devices were annealed at different temperatures to form nanostructures in the multilayer thin films for 1 h to increase both the Seebeck coefficients and the electrical conductivity and decrease the thermal conductivity. The highest Seebeck coefficient of −437.78 μV/K for Ni/Bi2Te3/Ni thin films was achieved when the fabricated thin film device was annealed at 300 °C. The highest electrical conductivity of σ = 4.26 × 106 (Ω m)−1 for Ni/Bi2Te3/Ni thin films was achieved when the sample was annealed at 100 °C, and then the electrical conductivity decreases when the annealing continues. The highest Seebeck coefficient of −1253.85 μV/K for the Ni/Sb2Te3/Ni thin films was achieved when the fabricated devices were annealed at 200 °C. The highest electrical conductivity value of σ = 1.45 × 104 (Ω m)−1 was achieved for the Ni/Sb2Te3/Ni thin films when the sample was annealed at 250 °C. A scanning electron microscope with an energy dispersive x-ray spectrometer (SEM) shows that there is some nanodot formation at the surface of the Ni thin film when Ni/Bi2Te3/Ni was annealed continuously at different temperatures between 0 and 300 °C. Ni/Sb2Te3/Ni thin films show smooth surfaces when they were annealed at different temperatures between 0 and 300 °C.
- 1 September 2017
- Published by American Vacuum Society in Journal of Vacuum Science & Technology B
- Vol. 35 (5) , 051401
Open AccessThermoelectric and optical properties of advanced thermoelectric devices from Ni/Bi2Te3/Ni and Ni/Sb2Te3/Ni thin films
Thermoelectric devices were prepared from Ni/Bi2Te3/Ni and Ni/Sb2Te3/Ni thin films using both direct current/radio-frequency magnetron sputtering and E-beam deposition systems. Thermoelectric thin film devices were annealed at different temperatures to form nanostructures in the multilayer thin films for 1 h to increase both the Seebeck coefficients and the electrical conductivity and decrease the thermal conductivity. The highest Seebeck coefficient of −437.78 μV/K for Ni/Bi2Te3/Ni thin films was achieved when the fabricated thin film device was annealed at 300 °C. The highest electrical conductivity of σ = 4.26 × 106 (Ω m)−1 for Ni/Bi2Te3/Ni thin films was achieved when the sample was annealed at 100 °C, and then the electrical conductivity decreases when the annealing continues. The highest Seebeck coefficient of −1253.85 μV/K for the Ni/Sb2Te3/Ni thin films was achieved when the fabricated devices were annealed at 200 °C. The highest electrical conductivity value of σ = 1.45 × 104 (Ω m)−1 was achieved for the Ni/Sb2Te3/Ni thin films when the sample was annealed at 250 °C. A scanning electron microscope with an energy dispersive x-ray spectrometer (SEM) shows that there is some nanodot formation at the surface of the Ni thin film when Ni/Bi2Te3/Ni was annealed continuously at different temperatures between 0 and 300 °C. Ni/Sb2Te3/Ni thin films show smooth surfaces when they were annealed at different temperatures between 0 and 300 °C.
- Open Access
- 1 February 2016
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 9 (2) , 356-363
Highly-Efficient Advanced Thermoelectric Devices from Different Multilayer Thin Films
Highly-Efficient Advanced Thermoelectric Devices from Different Multilayer Thin Films
- 1 February 2016
- Published by Science Publications in American Journal of Engineering and Applied Sciences
- Vol. 9 (2) , 356-363
Open AccessHighly-Efficient Advanced Thermoelectric Devices from Different Multilayer Thin Films
Highly-Efficient Advanced Thermoelectric Devices from Different Multilayer Thin Films
- 8 January 2015
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 44 (6) , 1884-1889
Thermoelectric Generators from AgBiTe and AgSbTe Thin Films Modified by High-Energy Beam
- 8 January 2015
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 44 (6) , 1884-1889
Thermoelectric Generators from AgBiTe and AgSbTe Thin Films Modified by High-Energy Beam
- 6 September 2014
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 44 (6) , 1420-1425
Effects of Thermal Annealing on the Thermoelectric and Optical Properties of SiO2/SiO2+Cu Nanolayer Thin Films
- 6 September 2014
- Published by Springer Nature in Journal of Electronic Materials
- Vol. 44 (6) , 1420-1425
Effects of Thermal Annealing on the Thermoelectric and Optical Properties of SiO2/SiO2+Cu Nanolayer Thin Films