Analysis of Threshold Conditions for Cementation of Soiling on PV Modules and Telescope Mirrors
- 18 January 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 14 (2) , 330-336
Abstract
To enhance the understanding of the high adhesion of dust particles on photovoltaic modules and telescope mirrors, glass, and mirror samples were subjected to soiling tests in laboratory and field experiments. The specific objective of this study was to investigate glass contamination on a microstructural level using light and scanning electron microscopy (SEM). In addition, the dusts were analyzed for their main mineral components using X-ray diffraction. The study exposed samples to natural dust from Qatar, Chile, Morocco, and the standard Middle East Test Dust. The tests showed that the adhesive strength increases abruptly due to cementation when the surface temperature falls below a critical temperature difference to the dew point (ΔT dp/critical / K). This work found values of ΔT dp/critical from 1.9 K to >7 K. The analysis shows that cementation is initiated by precipitation of the main soluble component available and promoted by surface humidity. The contribution of the water solubility of the dust components to the cementation process is more significant than the hygroscopic properties of the dust. SEM images show different cementation structures on the sample surfaces. These structures range from needle-shaped deposits <1 μm to rod- and plate-shaped structures from 3 μm to 30 μm to cubes with edge lengths from 2 μm to 50 μm. All appearances of cementation lead to significantly increased particle adhesion so that wind speeds less than 10 m/s do not remove particles from the surface. This investigation compared, at a microstructural level, laboratory test samples with outdoor samples from Morocco, Qatar, and Chile. The findings showed that the laboratory tests are very well suited to reproduce the cementation effects from the outdoor tests. This article quantified cementation conditions for the first time in dependent on operating environments. These results will support the development of suitable prevention strategies against soiling on functional surfaces.Keywords
Funding Information
- German Ministry of Economics within project ETA-Tau (03VP08430)
This publication has 24 references indexed in Scilit:
- The spatial distribution of soluble salts in the surface soil of the Atacama Desert and their relationship to hyperaridityGlobal and Planetary Change, 2020
- Effect of tilt angle on soiling in perpendicular windSolar Energy, 2019
- Techno-Economic Assessment of Soiling Losses and Mitigation Strategies for Solar Power GenerationJoule, 2019
- Atmospheric deposition across the Atacama Desert, Chile: Compositions, source distributions, and interannual comparisonsChemical Geology, 2019
- Fundamentals of soiling processes on photovoltaic modulesRenewable and Sustainable Energy Reviews, 2018
- Investigation of factors affecting condensation on soiled PV modulesSolar Energy, 2018
- Adhesion mechanisms on solar glass: Effects of relative humidity, surface roughness, and particle shape and sizeSolar Energy Materials and Solar Cells, 2017
- Characterization of soiling on PV modules in the Atacama DesertEnergy Procedia, 2017
- An investigation of the key parameters for predicting PV soiling lossesProgress in Photovoltaics: Research and Applications, 2017
- Microstructural analysis of the cementation process during soiling on glass surfaces in arid and semi‐arid climatesPhysica Status Solidi (RRL) – Rapid Research Letters, 2016