Plasticity of Porous NiTi Alloys Obtained by Self-propagating High-temperature Synthesis in Closed and Open Gas Flow Reactors
- 9 January 2023
- journal article
- research article
- Published by Taylor & Francis in Materials and Manufacturing Processes
- Vol. 38 (6) , 659-667
Abstract
Porous NiTi alloys were obtained by self-propagating high-temperature synthesis (SHS) using layer-by-layer combustion in closed and open gas flow reactors under a protective argon atmosphere. The maximum compressive strain of porous NiTi alloys synthesized in the closed reactor was 34% compared to 7% in the open gas flow reactor. X-ray diffraction, differential scanning calorimetry, scanning electron microscopy, energy dispersive spectroscopy, and optical microscopy showed that the reaction products in the two-phase gas zone of peritectic crystallization are in the form of isolated Ti2Ni crystalline clusters in the TiNi matrix. The ductility and strength of the recrystallized Ti2Ni phase hard dendrites increase the effective stiffness of porous NiTi alloys and decrease the maximum compressive strain. A highly porous NiTi alloy with improved mechanical properties was obtained by the SHS method in a closed reactor.Keywords
Funding Information
- Government of the Russian Federation (075-15-2021-612)
- Ministry of Science and Higher Education of the Russian Federation (075-15-2021-693)
This publication has 18 references indexed in Scilit:
- Formation of mineral phases in self-propagating high-temperature synthesis (SHS) of porous TiNi alloyMaterials Research Express, 2019
- Method for grain size determination in carbon steels based on the ultimate openingMeasurement, 2019
- Effect of a high temperature and hydrostatic pressure on the structure and the properties of a high-strength cast AM5 (the 201.2 alloy type) aluminum alloyRussian Metallurgy (Metally), 2016
- Influence of heat treatment on shape memory effect in porous titanium nickel synthesized by the SHS processRussian Physics Journal, 2011
- Investigation of the influence of Ni powder size on microstructural evolution and the thermal explosion combustion synthesis of NiTiIntermetallics, 2009
- Investigations of the structure of porous titanium nickelide after thermal treatmentRussian Physics Journal, 2008
- Physical metallurgy of Ti–Ni-based shape memory alloysProgress in Materials Science, 2005
- Porous TiNi shape memory alloy with high strength fabricated by self-propagating high-temperature synthesisMaterials Letters, 2004
- Metallography of powder metallurgy materialsMaterials Characterization, 2003
- Ignition mechanism in combustion synthesis of Ti–Al and Ti–Ni systemsIntermetallics, 2003