Line-scanning laser scattering system for fast defect inspection of a large aperture surface
Author:
- 25 August 2017
- journal article
- Published by Optica Publishing Group in Applied Optics
- Vol. 56 (25) , 7089-7098
Abstract
Inspection of defects with micrometer level on large aperture surfaces with hundreds of millimeters is one of the challenges in surface quality evaluation. Various microscopic imaging methods have been applied to inspecting the surface defects, while they are time-consuming for the small field of view and the sub-aperture stitching. To tackle this problem, a high-speed line scanning system based on the dark-field laser scattering method is proposed. The laser beam is scanned by the rotating polygon mirror to a laser line for high throughput and then the telecentric F-theta lens converges each incoming laser beam to a focused spot that creates a high intensity to enhance the signal-to-noise ratio. The scattered light from surface defect is collected by the designed integrating sphere for low background noise and the scattering signal is detected for each focused spot at a proper acquisition rate by a photomultiplier (PMT) detector with extremely short response time. In the meanwhile, the tested surface is moving perpendicular to the laser line to realize high-speed large area inspection. The defect inspection system is confirmed experimentally with laser line length of 60 mm, minimum detectable size less than 0.5 μm, and figure of merit of . The work put forward an effective method for automatic discovery of surface defects such as scratches, digs, and contaminants on large aperture surfaces.
Keywords
Funding Information
- Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences (SIOM)
- National Natural Science Foundation of China (NSFC) (50875074)
This publication has 21 references indexed in Scilit:
- Large Optics for the National Ignition FacilityFusion Science and Technology, 2016
- A high-speed particle-detection in a large area using line-laser light scatteringCurrent Applied Physics, 2015
- A Novel and Effective Surface Flaw Inspection Instrument for Large-Aperture Optical ElementsIEEE Transactions on Instrumentation and Measurement, 2015
- Ultrafast dark-field surface inspection with hybrid-dispersion laser scanningApplied Physics Letters, 2014
- Distortion correction in surface defects evaluating system of large fine opticsOptics Communications, 2014
- Dark-field microscopic image stitching method for surface defects evaluation of large fine opticsOptics Express, 2013
- A structured mechanism development and experimental parameter selection of laser scattering for the surface inspection of flat-panel glassesInternational Journal of Production Research, 2009
- Microscopic scattering imaging measurement and digital evaluation system of defects for fine optical surfaceOptics Communications, 2007
- Optical metrology devices for high-power laser large optics2007
- Development of practical damage mapping and inspection systems1999