Comparative evaluation of fatigue crack propagation in high-strength steels S460, S690, and S960 using optical and CMOD methods at stress ratio R = 0.1
Open Access
- 1 January 2026
- journal article
- Published by Walter de Gruyter GmbH in Journal of the Mechanical Behavior of Materials
- Vol. 35 (1)
Abstract
The present study compares the fatigue crack propagation behavior of three high-strength steels – S460, S690, and S960 – tested at a stress ratio R = 0.1 and at room temperature. The measurement of fatigue crack growth was accomplished through the implementation of two complementary techniques. The first technique involved the assessment of crack mouth opening displacement (CMOD), which was recorded using a clip gauge on an MTS 100 kN testing machine. The second technique entailed the use of an optical crack tracking resonant electromagnetic pulsator Amsler 20 HFP 5100. The material characterization process entailed the execution of tensile testing, Vickers hardness measurements, and microstructural analysis. The propagation rates of fatigue cracks were evaluated using Paris-law fitting, which revealed that S460 exhibited the lowest crack growth rate, followed by S690 and S960. Scanning electron microscopy (SEM) was utilized to confirm the presence of Mode I fatigue striations in all materials. The novelty of the work lies in the controlled replicate-specimen comparison of three HSS grades under identical CT geometry, stress ratio, laboratory conditions, and Paris-law evaluation procedure, while transparently defining the CMOD–optical comparison as a method-aware comparison rather than a simultaneous within-specimen validation.Keywords
This publication has 35 references indexed in Scilit:
- Comparison of fatigue crack growth design curves on GMAW and EBW joints of high strength steelsWelding in the World, 2024
- Role of the martensitic microstructure in the stabilized residual stresses under cyclic loading and in the fatigue behavior of two steelsInternational Journal of Fatigue, 2024
- Fatigue crack growth modelling for S355 structural steel considering plasticity-induced crack-closure by means of UniGrow modelInternational Journal of Fatigue, 2022
- A review of fatigue damage detection and measurement techniquesInternational Journal of Fatigue, 2022
- Development of an ultrasonic fatigue testing system for gigacycle fatigueMaterial Design & Processing Communication, 2019
- Recent results on fatigue strength improvement of high-strength steel welded jointsInternational Journal of Fatigue, 2017
- The effect of low temperatures on the fatigue crack growth of S460 structural steelInternational Journal of Fatigue, 2016
- High resolution digital image correlation measurements of strain accumulation in fatigue crack growthInternational Journal of Fatigue, 2013
- Fatigue crack growth in a diverse range of materialsInternational Journal of Fatigue, 2012
- The effect of environment on the mechanism of Stage I fatigue fractureMetallurgical Transactions, 1971