High‐Performance, Low‐Cost, and Dense‐Structure Electrodes with High Mass Loading for Lithium‐Ion Batteries
Authors:
- 11 July 2019
- journal article
- research article
- Published by Wiley in Advanced Functional Materials
- Vol. 29 (34) , 1903961
Abstract
Lithium‐ion batteries have undergone a remarkable development in the past 30 years. However, conventional electrodes are insufficient for the ever‐increasing demand of high‐energy batteries. Here, reported is a thick electrode with a dense structure, as an alternative to the commonly recognized porous framework. A low‐temperature sintering technology with the aid of aqueous solvent, high pressure, and an ion‐conductive additive is originally developed for preparing the LiCoO2 (LCO)/Li4Ti5O12 (LTO) dense‐structure electrode as the representative cathode/anode material. The 400 µm thick cathode with 110 mg cm−2 mass loading achieves a high specific capacity of 131.2 mAh g−1 with a good capacity retention of 96% over 150 cycles, far exceeding the commercial counterpart (≈40 µm) of 54.1 mAh g−1 with 39%. The ultrathick electrode of 1300 µm thickness presents a remarkable area capacity of 28.6 mAh cm−2 that is 16 times that of the commercial electrode. The full cell based on the dense electrodes delivers an extremely high areal capacity of 14.4 mAh cm−2. The ion‐diffusion coefficients of the densely sintered electrodes increase by nearly three orders of magnitude. This design opens up a new avenue for scalable and sustainable material manufacturing towards various practical applications.Keywords
Funding Information
- ShanghaiTech University
- National Natural Science Foundation of China (21805185)
- Natural Science Foundation of Shanghai Municipality (18ZR1425200)
- China Postdoctoral Science Foundation (2017M621574)
This publication has 25 references indexed in Scilit:
- Adhesive PEG-based binder for aqueous fabrication of thick Li4Ti5O12 electrodeElectrochimica Acta, 2013
- A comprehensive understanding of electrode thickness effects on the electrochemical performances of Li-ion battery cathodesElectrochimica Acta, 2012
- Ultrathin Graphite Foam: A Three-Dimensional Conductive Network for Battery ElectrodesNano Letters, 2012
- Thick LiCoO2/Nickel Foam Cathode Prepared by an Adhesive and Water-Soluble PEG-Based Copolymer BinderJournal of the Electrochemical Society, 2012
- Lithium‐Ion Textile Batteries with Large Areal Mass LoadingAdvanced Energy Materials, 2011
- Formulation and characterization of ultra-thick electrodes for high energy lithium-ion batteries employing tailored metal foamsJournal of Power Sources, 2011
- Kinetic study on LiFePO4-positive electrode material of lithium-ion batteryIonics, 2011
- Ultrahigh‐Energy‐Density Microbatteries Enabled by New Electrode Architecture and Micropackaging DesignAdvanced Materials, 2010
- Battery materials for ultrafast charging and dischargingNature, 2009
- Effect of Porosity on the Capacity Fade of a Lithium-Ion BatteryJournal of the Electrochemical Society, 2004