Algorithm for estimating SARA fraction properties and its application in predicting the densities of heavy oils, bitumen and diluted bitumen with solvents
- 25 April 2022
- journal article
- research article
- Published by Taylor & Francis in Petroleum Science and Technology
- Vol. 41 (4) , 425-443
Abstract
Using aromatic ring index (ARI) and the densities of saturates, aromatics, resins and asphaltenes (SARA) at any temperature, an algorithm was developed to iteratively estimate the molecular weights and specific gravities (60 °F) of the SARA fractions. The algorithm circumvents molecular weight measurements in reporting SARA fractions properties. Then, using the corresponding state principles the critical properties and acentric factor of the fractions were estimated using the correlations available in literature. Further, applying regular solution theory the densities of heavy oils, bitumen, and five diluted Athabasca bitumen with 5 solvents were predicted from Hankinson-Thomson and a compressed liquid density correlation. The average absolute deviation (AAD) in predicting the densities was found to be 1.33% for 1524 points with temperature range from 288 K to 463 K and pressure from 0.1 to 10 MPa. The method exhibits predictive ability and can be used satisfactorily for any heavy oil/bitumen/solvent system. In order to improve the accuracy of the calculated densities, a constant density translation method can also be applied to the bitumen/oil mixtures. When the translation method was used, the AAD of mixtures was improved to 0.69%. The proposed method was found to be better or comparable to other models in predicting densities.Keywords
This publication has 39 references indexed in Scilit:
- Application of the One-Third rule in hydrocarbon and crude oil systemsFluid Phase Equilibria, 2010
- Modeling Asphaltene Phase Behavior in Crude Oil Systems Using the Perturbed Chain Form of the Statistical Associating Fluid Theory (PC-SAFT) Equation of StateEnergy & Fuels, 2009
- An extended saturated liquid density equationFluid Phase Equilibria, 1999
- Molecular Weight and Specific Gravity Distributions for Athabasca and Cold Lake Bitumens and Their Saturate, Aromatic, Resin, and Asphaltene FractionsIndustrial & Engineering Chemistry Research, 1999
- Molecular weight distribution for heavy fossil fuels from gel-permeation chromatography and characterization dataIndustrial & Engineering Chemistry Research, 1987
- An internally consistent correlation for predicting the critical properties and molecular weights of petroleum and coal-tar liquidsFluid Phase Equilibria, 1984
- New procedure for molecular-weight determination by vapour-phase osmometryFuel, 1979
- Asphaltene molecular weights by a cryoscopic methodFuel, 1977
- Investigation of asphaltene molecular weightsFuel, 1976
- A generalized thermodynamic correlation based on three‐parameter corresponding statesAIChE Journal, 1975