Effects of Addition of Ultra-High Molecular Weight Polyethylene on Tie-Molecule and Crystallization Behavior of Unimodal PE-100 Pipe Materials
Authors:
- 31 August 2016
- journal article
- research article
- Published by Taylor & Francis in Journal of Macromolecular Science, Part B
- Vol. 55 (10) , 1007-1021
Abstract
With the fast-growing global market demand for high-grade plastic pipe materials, high-density polyethylene (HDPE) products, such as PE-100, are playing a more and more important role. On the other hand, lack of basic understanding about these materials hinders the further development of this field. To investigate the effects of addition of an ultra-high molecular weight polyethylene (UHMWPE) on tie-molecules, crystallization kinetics and long-term properties of a unimodal HDPE pipe material (UMPE-100) made from a Cr-based catalyst, the blends of UMPE-100/UHMWPE were prepared through a twin-screw extruder. The probability of tie-molecules was calculated by a statistical approach, which has been proposed by Huang and Brown (Huang, Y.L.; Brown, N.J. Polym. Sci. B. 1991, 29, 129–137). It showed that as UHMWPE was added, the probability of tie-molecules increased due to increased molecular weight. The crystallization kinetics of the blends was investigated by an isothermal crystallization method using differential scanning calorimetry. Addition of small amount of UHMWPE improved the crystallization rate greatly. The natural draw ratio of blends decreased with improvement of tie-molecule probability and crystallization rate, indicating improvement in long-term properties.Keywords
This publication has 32 references indexed in Scilit:
- Effect of the Distribution of Short-Chain Branches on Crystallization Kinetics and Mechanical Properties of High-Density PolyethyleneMacromolecules, 2008
- Degree of comonomer inclusion into lamella crystal for propylene/olefin copolymersPolymer, 2002
- Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. II. Short‐term creep of isotropic and drawn materialsJournal of Applied Polymer Science, 2002
- Physical and mechanical properties of polyethylene for pipes in relation to molecular architecture. I. Microstructure and crystallisation kineticsPolymer, 2001
- Environmental stress cracking behavior of short‐chain branch polyethylenes in Igepal solution under a constant loadJournal of Applied Polymer Science, 1994
- Effects of Environmental Stress Cracking Agents on the Failure Mechanisms of Commercial Gas Pipe ResinsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1992
- Slow Crack Growth and Molecular Mobility in Commercial Gas Pipe ResinsInternational Journal of Polymeric Materials and Polymeric Biomaterials, 1991
- The influence of morphology and molecular weight on ductile-brittle transitions in linear polyethyleneJournal of Materials Science, 1983
- Environmental stress cracking of polyethylene: Temperature effectJournal of Applied Polymer Science, 1979
- Studies of structure and dynamics of solid polymers by elastic and inelastic neutron scatteringPure and Applied Chemistry, 1978