Study on tensile strength of single dovetail joint: experimental, numerical, and analytical analysis
- 16 December 2022
- journal article
- research article
- Published by Taylor & Francis in Wood Material Science & Engineering
- Vol. 18 (4) , 1478-1486
Abstract
The tensile strength of the single dovetail joint was investigated by experimental, numerical, and analytical methods. First, a numerical model of the dovetail joint was constructed based on the cohesive model using the Traction Separation law. Secondly, an analytical model was proposed based on the mechanical properties of the wood and the geometric dimensions of the dovetail joint. Finally, limited experimental tests (only changing the thickness length and width of the dovetail joint) were conducted to validate the numerical and analytical models. The results showed that the numerical model was an efficient method with ratios ranging from 0.84 to 1.35. The analytical model underestimated the tensile strength with ratios ranging from 0.63 to 0.85. The numerical analysis results showed that the dovetail tenon length and thickness significantly affect the maximum tensile strength. The tail angle and thickness significantly affected the elastic stiffness of the dovetail joint. The analytical model indicated the relationships between the dimensions of the dovetail joint and the tensile strength. The proposed methods will help to rationally design and optimize the tensile strength of a single dovetail joint.Keywords
Funding Information
- Scientific Research Foundation
- Nanjing Forestry University
- International Cooperation Joint Laboratory for Production, Education, Research
- Application of Ecological Health Care on Home Furnishing
This publication has 14 references indexed in Scilit:
- A Methodology for Optimizing Tenon Geometry Dimensions of Mortise-and-Tenon Joint Wood ProductsForests, 2021
- Numerical and experimental investigation on the elastic stiffness of glued dovetail jointsConstruction and Building Materials, 2020
- Comparative study on the tensile performance of box frames constructed by keyed joints and dovetail jointsBioResources, 2020
- Finite Element Modeling of Fiber Reinforced Polymer-Based Wood Composites Used in Furniture Construction Considering Semi-Rigid ConnectionsDrvna industrija, 2020
- A finite element model of semi-rigid mortise-and-tenon joint considering glue line and friction coefficientJournal of Wood Science, 2019
- Modeling of Laminated Veneer Lumber Beams with Holes Using Cohesive ElementsJournal of Structural Engineering, 2016
- Assessment of the bending strength of mortise-tenon and dovetail joints in leg-and-rail construction using Klainedoxa gabonensis Pierre Ex Engl. and Entandrophragma cylindricum (Sprague) SpragueWood Material Science & Engineering, 2015
- Bending Moment Capacity of L-Shaped Mitered Frame Joints Constructed of MDF and ParticleboardBioResources, 2015
- Analysis of factors affecting diagonal tension and compression capacity of corner joints in furniture frames fabricated with dovetail keyJournal of Forestry Research, 2013
- Analysis of Strain Distributions of Wooden Dovetail Joints Using Digital Image Correlation MethodJournal of the Society of Materials Science, Japan, 2006