The effect of expanded graphite on the thermal stability, latent heat, and flammability properties of EVA/wax phase change blends
- 26 February 2015
- journal article
- research article
- Published by Wiley in Polymer Engineering & Science
- Vol. 55 (6) , 1255-1262
Abstract
This article reports on the morphology, melting and crystallization behavior, thermal stability, flammability and thermal conductivity of shape‐stabilized phase‐change materials (PCM) for thermal energy storage, based on a soft Fischer–Tropsch paraffin wax, the PCM, blended with ethylene vinyl acetate (EVA). These immiscible blends were melt‐mixed with expanded graphite (EG) (up to 9 wt%) to improve the thermal conductivity and flame resistance of the material. It was observed that the EG particles agglomerate in the absence of wax, but disperse much better in the EVA/wax blend, probably because the wax penetrates in between the EG layers (there seems to be a better interaction between wax and EG than between EVA and EG) and separates the layers, giving rise to smaller and better dispersed EG particles. This gives rise to better thermal conductivity and flame resistance. There were no significant changes in the melting temperature of EVA in the EVA/EG composites, while the crystallinities of EVA were observably lower in the presence of EG. The thermal stability and flammability results show an increase in thermal stability and flame resistance of EVA, which further improved in the presence of wax because of the smaller and better dispersed EG particles in these systems. POLYM. ENG. SCI., 55:1255–1262, 2015. © 2015 Society of Plastics EngineersKeywords
Funding Information
- the National Research Foundation of South Africa
This publication has 31 references indexed in Scilit:
- Intumescence: An effect way to flame retardance and smoke suppression for polystryenePolymer Degradation and Stability, 2012
- Investigation of exfoliated graphite nanoplatelets (xGnP) in improving thermal conductivity of paraffin wax-based phase change materialSolar Energy Materials and Solar Cells, 2011
- The influence of expanded graphite on thermal properties for paraffin/high density polyethylene/chlorinated paraffin/antimony trioxide as a flame retardant phase change materialEnergy Conversion and Management, 2010
- Heat conduction enhanced shape-stabilized paraffin/HDPE composite PCMs by graphite addition: Preparation and thermal propertiesSolar Energy Materials and Solar Cells, 2010
- Effect of expanded graphite on properties of high-density polyethylene/paraffin composite with intumescent flame retardant as a shape-stabilized phase change materialSolar Energy Materials and Solar Cells, 2010
- Investigation of thermally conducting phase‐change materials based on polyethylene/wax blends filled with copper particlesJournal of Applied Polymer Science, 2010
- Thermal behaviour of low and high molecular weight paraffin waxes used for designing phase change materialsThermochimica Acta, 2008
- Influence of additives on thermal conductivity of shape-stabilized phase change materialSolar Energy Materials and Solar Cells, 2006
- Study on paraffin/expanded graphite composite phase change thermal energy storage materialEnergy Conversion and Management, 2006
- Form-stable paraffin/high density polyethylene composites as solid–liquid phase change material for thermal energy storage: preparation and thermal propertiesEnergy Conversion and Management, 2004