Design and optimization of a dual-ring adjustable permanent magnet strong focusing system based on Halbach Array
- 16 March 2026
- journal article
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (14)
Abstract
Electron Beam Additive Manufacturing (EBAM) requires a focusing system capable of both precise focusing and dynamic adjustability. This paper presents the design, optimization, and experimental validation of a dual-ring adjustable permanent magnet strong-focusing system based on a Halbach array, intended to replace conventional electromagnetic solenoids in EBAM. To accommodate the distinct requirements of high-energy-density melting and uniform preheating/annealing, a system comprising three permanent magnet quadrupole units was developed. Each unit features two concentric rings of octagonal magnets arranged in a Halbach configuration, enabling dynamic beam spot adjustment through the relative rotation of the outer ring. The mechanical structure, including rotatable yokes and shielding end plates, was optimized to ensure precise motion and suppress fringe field interference. Beam matching simulations determined the optimal magnetic field parameters, and a prototype was fabricated using Samarium-Cobalt magnets. Comprehensive magnetic field measurements and particle tracking simulations confirmed the system's performance: achieving a fine focus spot with a radius of 0.0905 mm for melting and a larger, uniform spot of 0.4418 mm for preheating/annealing. The measured field distributions deviated from simulations by less than 1%, validating the efficacy of the proposed quadrupole field adjustment scheme. This work demonstrates an energyefficient focusing solution for EBAM, eliminating the need for high-power, water-cooled solenoid systems.Keywords
Funding Information
- Natural Science Foundation of Wuhan
- Program for HUST Academic Frontier Youth Team (2019QYTD06)
This publication has 18 references indexed in Scilit:
- A detailed study of pre-heating effects in electron beam melting powder bed fusion processAdditive Manufacturing, 2025
- Electron Beam Powder Bed Fusion Additive Manufacturing: A Comprehensive Review and its Development in ChinaAdditive Manufacturing Frontiers, 2024
- Study of irregular electron beam correcting permanent-magnet-quadrupole doublet lens for irradiation acceleratorReview of Scientific Instruments, 2023
- Metal additive manufacturing in aerospace: A reviewMaterials & Design, 2021
- Analysis of the influence of a solenoid magnetic field in the azimuth transmission systemScientific Reports, 2021
- Effect of preheating on the thermal, microstructural and mechanical properties of selective electron beam melted Ti-6Al-4V componentsMaterials & Design, 2019
- Tunable high gradient quadrupoles for a laser plasma acceleration based FELNuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, 2018
- Effect of inter-layer dwell time on distortion and residual stress in additive manufacturing of titanium and nickel alloysJournal of Materials Processing Technology, 2015
- A compact vibrating-sample magnetometer with variable permanent magnet flux sourceReview of Scientific Instruments, 1994
- Design of permanent multipole magnets with oriented rare earth cobalt materialNuclear Instruments and Methods, 1980