Zijian Zhou
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Zijian Zhou has a total of 20 co-authors. Here are the top co-authors by number of shared publications:
- Jiang Huang
Huazhong University of Science and Technology
9 shared publications - Haozhe Li
State Key Laboratory of Advanced Electromagnetic Technology, Huazhong University of Science and Technology, Wuhan, Hubei, China
6 shared publications Chunjiang Lin
5 shared publicationsJiangrui Xing
5 shared publicationsZhenyi Zhang
5 shared publications- Keyan Sheng
State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology , Wuhan 430074, Hubei, China
3 shared publications
Latest Publications
- 16 March 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (14)
Design and optimization of a dual-ring adjustable permanent magnet strong focusing system based on Halbach Array
Electron Beam Additive Manufacturing (EBAM) requires a focusing system capable of both precise focusing and dynamic adjustability. This paper presents the design, optimization, and experimental validation of a dual-ring adjustable permanent magnet strong-focusing system based on a Halbach array, intended to replace conventional electromagnetic solenoids in EBAM. To accommodate the distinct requirements of high-energy-density melting and uniform preheating/annealing, a system comprising three permanent magnet quadrupole units was developed. Each unit features two concentric rings of octagonal magnets arranged in a Halbach configuration, enabling dynamic beam spot adjustment through the relative rotation of the outer ring. The mechanical structure, including rotatable yokes and shielding end plates, was optimized to ensure precise motion and suppress fringe field interference. Beam matching simulations determined the optimal magnetic field parameters, and a prototype was fabricated using Samarium-Cobalt magnets. Comprehensive magnetic field measurements and particle tracking simulations confirmed the system's performance: achieving a fine focus spot with a radius of 0.0905 mm for melting and a larger, uniform spot of 0.4418 mm for preheating/annealing. The measured field distributions deviated from simulations by less than 1%, validating the efficacy of the proposed quadrupole field adjustment scheme. This work demonstrates an energyefficient focusing solution for EBAM, eliminating the need for high-power, water-cooled solenoid systems.
- 16 March 2026
- Published by IOP Publishing in Journal of Physics D: Applied Physics
- Vol. 59 (14)
Design and optimization of a dual-ring adjustable permanent magnet strong focusing system based on Halbach Array
Electron Beam Additive Manufacturing (EBAM) requires a focusing system capable of both precise focusing and dynamic adjustability. This paper presents the design, optimization, and experimental validation of a dual-ring adjustable permanent magnet strong-focusing system based on a Halbach array, intended to replace conventional electromagnetic solenoids in EBAM. To accommodate the distinct requirements of high-energy-density melting and uniform preheating/annealing, a system comprising three permanent magnet quadrupole units was developed. Each unit features two concentric rings of octagonal magnets arranged in a Halbach configuration, enabling dynamic beam spot adjustment through the relative rotation of the outer ring. The mechanical structure, including rotatable yokes and shielding end plates, was optimized to ensure precise motion and suppress fringe field interference. Beam matching simulations determined the optimal magnetic field parameters, and a prototype was fabricated using Samarium-Cobalt magnets. Comprehensive magnetic field measurements and particle tracking simulations confirmed the system's performance: achieving a fine focus spot with a radius of 0.0905 mm for melting and a larger, uniform spot of 0.4418 mm for preheating/annealing. The measured field distributions deviated from simulations by less than 1%, validating the efficacy of the proposed quadrupole field adjustment scheme. This work demonstrates an energyefficient focusing solution for EBAM, eliminating the need for high-power, water-cooled solenoid systems.
- 19 December 2025
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 202
Enhancing electron beam curing efficiency and performance of PDMS coatings via D4H/POSS dual crosslinkers
- 19 December 2025
- Published by Elsevier in Composites Part A: Applied Science and Manufacturing
- Vol. 202
Enhancing electron beam curing efficiency and performance of PDMS coatings via D4H/POSS dual crosslinkers
- Open Access
- 18 October 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 57 (3) , 103240
Engineering implementation of permanent magnet uniform spreading system for 3 MeV electron beam accelerator
- 18 October 2024
- Published by Elsevier in Nuclear Engineering and Technology
- Vol. 57 (3) , 103240
Open AccessEngineering implementation of permanent magnet uniform spreading system for 3 MeV electron beam accelerator
- 13 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (7) , 2760-2765
Electrostatic Design of a Tunable Tetrode Electron Gun for Electron Beam Additive Manufacturing Device
The electron gun, as a critical device for emitting high-speed electrons, determines the electron beam current and quality in electron beam additive manufacturing (EBAM). In this article, a tetrode electron gun with a control electrode is designed to improve the quality and controllability of the electron beam. The control electrode, optimized by parametric simulation, provides secondary confinement of the electron beam. This confinement aims to reduce the beam spot size and emittance while decoupling spot size from the current. Specifically, the maximum attainable current reaches 200 mA, while the beam waist radius contracts to a mere 1.09 mm. The normalized emittance, a crucial parameter, measures at 1.536 $\times$ 10 $^{-\text{7}}$ $\text{m}\cdot\text{rad}$ . Furthermore, stability analysis of the electron gun explores the influence of electrode potential on its performance. By co-regulating the bias voltage and the control voltage, the electron beam current can smoothly rise to 200 mA while maintaining the beam spot radius of 2 mm. This article indicates the tetrode electron gun’s potential for precise control, thereby improving the quality and precision of high melting point alloy additive manufacturing processes.
- 13 September 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 52 (7) , 2760-2765
Electrostatic Design of a Tunable Tetrode Electron Gun for Electron Beam Additive Manufacturing Device
The electron gun, as a critical device for emitting high-speed electrons, determines the electron beam current and quality in electron beam additive manufacturing (EBAM). In this article, a tetrode electron gun with a control electrode is designed to improve the quality and controllability of the electron beam. The control electrode, optimized by parametric simulation, provides secondary confinement of the electron beam. This confinement aims to reduce the beam spot size and emittance while decoupling spot size from the current. Specifically, the maximum attainable current reaches 200 mA, while the beam waist radius contracts to a mere 1.09 mm. The normalized emittance, a crucial parameter, measures at 1.536 $\times$ 10 $^{-\text{7}}$ $\text{m}\cdot\text{rad}$ . Furthermore, stability analysis of the electron gun explores the influence of electrode potential on its performance. By co-regulating the bias voltage and the control voltage, the electron beam current can smoothly rise to 200 mA while maintaining the beam spot radius of 2 mm. This article indicates the tetrode electron gun’s potential for precise control, thereby improving the quality and precision of high melting point alloy additive manufacturing processes.
- Open Access
- 29 September 2023
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 26 (9) , 092402
Tunable and compact permanent magnet uniform spreading beamline for electron irradiation accelerators
The growing interest in the field of electron irradiation accelerators has led to various research opportunities, with a crucial emphasis on enhancing the irradiation homogeneity of accelerators to advance the industry of the irradiation process. In this study, we introduce a tunable and compact uniform spreading beamline that comprises a permanent magnet quadrupole doublet and an electron beam permanent magnet spreading system. This beamline could solve the problem of poor irradiation homogeneity caused by irregular beam spots in electron irradiation accelerators. Flexible and tunable magnetic yokes enable rapid changes to the magnetic field distribution based on different beam spot profiles or irradiation processing requirements, achieving uniform spreading of different beam spots and improving irradiation homogeneity. Additionally, we evaluated the performance of rectangular permanent magnet poles to minimize errors in future accelerator applications. The implementation of this beamline enhances irradiation quality and provides an experimental foundation for further investigating the interaction between electron beam irradiation rates and materials.
- 29 September 2023
- Published by American Physical Society (APS) in Physical Review Accelerators and Beams
- Vol. 26 (9) , 092402
Open AccessTunable and compact permanent magnet uniform spreading beamline for electron irradiation accelerators
The growing interest in the field of electron irradiation accelerators has led to various research opportunities, with a crucial emphasis on enhancing the irradiation homogeneity of accelerators to advance the industry of the irradiation process. In this study, we introduce a tunable and compact uniform spreading beamline that comprises a permanent magnet quadrupole doublet and an electron beam permanent magnet spreading system. This beamline could solve the problem of poor irradiation homogeneity caused by irregular beam spots in electron irradiation accelerators. Flexible and tunable magnetic yokes enable rapid changes to the magnetic field distribution based on different beam spot profiles or irradiation processing requirements, achieving uniform spreading of different beam spots and improving irradiation homogeneity. Additionally, we evaluated the performance of rectangular permanent magnet poles to minimize errors in future accelerator applications. The implementation of this beamline enhances irradiation quality and provides an experimental foundation for further investigating the interaction between electron beam irradiation rates and materials.
- 1 February 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (2) , 023301
Study of irregular electron beam correcting permanent-magnet-quadrupole doublet lens for irradiation accelerator
In this paper, a permanent-magnet-quadrupole doublet lens with strong-focusing is designed and manufactured. Such an instrument could solve the problem of irregular beam spots produced by the weak focusing of conventional solenoid-focusing systems in low-energy electron irradiation accelerators. It could provide a better and more appropriate initial beam spot before the beam enters the subsequent magnetic spreading system or magnetic scanning system, thus, improving the irradiation uniformity. The association of the parameters of the rectangular permanent magnet with the quadrupole magnetic field is investigated. Focusing results, obtained using irregular beam spots with different profiles and different energies, and magnetic field measurement results, both from the instrument, verify the engineering feasibility of this permanent-magnet-quadrupole doublet lens.
- 1 February 2023
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 94 (2) , 023301
Study of irregular electron beam correcting permanent-magnet-quadrupole doublet lens for irradiation accelerator
In this paper, a permanent-magnet-quadrupole doublet lens with strong-focusing is designed and manufactured. Such an instrument could solve the problem of irregular beam spots produced by the weak focusing of conventional solenoid-focusing systems in low-energy electron irradiation accelerators. It could provide a better and more appropriate initial beam spot before the beam enters the subsequent magnetic spreading system or magnetic scanning system, thus, improving the irradiation uniformity. The association of the parameters of the rectangular permanent magnet with the quadrupole magnetic field is investigated. Focusing results, obtained using irregular beam spots with different profiles and different energies, and magnetic field measurement results, both from the instrument, verify the engineering feasibility of this permanent-magnet-quadrupole doublet lens.
- Open Access
- 1 September 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (9) , 095008
Magnetic field measurements and experimental verification of 0.5-MeV permanent-magnet electron-beam-spread system
In this work, a permanent-magnet electron-beam-spread system for irradiation has been developed and constructed, and its performance was experimentally measured with a beam. This work is helpful to counter beam-tail sweep issues (resulting in excessive doses at the ends of each sweep). Using the beam’s optical transmission matrix and beam dynamics simulations, we analyzed the impact of the individual parameters of a special quadrupole magnet and a special octupole magnet on the beam spread, and we determined the optimal parameters for irradiation production. To meet the design requirements of the magnetic field, the yoke structure was optimized, and permanent magnets with very similar degrees of magnetization and small magnetic declinations were used. The permanent-magnet electron-beam-spread system was applied to an actual 0.5-MeV electron irradiation accelerator, and the engineering feasibility of the permanent magnet electron beam spread system was fully verified by measuring the uniformity of the beam after the spread.
- 1 September 2022
- Published by AIP Publishing in AIP Advances
- Vol. 12 (9) , 095008
Open AccessMagnetic field measurements and experimental verification of 0.5-MeV permanent-magnet electron-beam-spread system
In this work, a permanent-magnet electron-beam-spread system for irradiation has been developed and constructed, and its performance was experimentally measured with a beam. This work is helpful to counter beam-tail sweep issues (resulting in excessive doses at the ends of each sweep). Using the beam’s optical transmission matrix and beam dynamics simulations, we analyzed the impact of the individual parameters of a special quadrupole magnet and a special octupole magnet on the beam spread, and we determined the optimal parameters for irradiation production. To meet the design requirements of the magnetic field, the yoke structure was optimized, and permanent magnets with very similar degrees of magnetization and small magnetic declinations were used. The permanent-magnet electron-beam-spread system was applied to an actual 0.5-MeV electron irradiation accelerator, and the engineering feasibility of the permanent magnet electron beam spread system was fully verified by measuring the uniformity of the beam after the spread.