Understanding the Tribological Behavior of Graded (Cr,Al)N + Mo:S in Fluid-Free Friction Regime
Open Access
- 3 November 2021
- journal article
- research article
- Published by Springer Nature in Tribology Letters
- Vol. 69 (4) , 1-19
Abstract
Components running in fluid-free friction regimes are exposed to harsh conditions leading to increased friction and wear. Thereby, the use of the solid lubricant molybdenum disulfide (MoS2) via lacquers, powders or physical vapor deposition (PVD) coatings enables a friction and wear reduction. However, the tribological performance is limited to low mechanical loads. A promising coating concept already proven for high mechanical loads is the incorporation of the triboactive elements Mo and S in wear resistant hard nitride (Cr,Al)N matrix. In this study the supply mechanism and transfer of the tribofilm build out of the toplayer of the triboactive coating graded (Cr,Al)N + Mo:S under high mechanical loads at humid air were analyzed. Here, the chemical composition of the tribofilm was determined by a combination of Raman spectroscopy and X-ray photoelectron spectroscopy (XPS) and correlated with tribological analysis. The results prove a friction and wear reduction independent of Hertzian pressure in the area of 400 MPa ≤ pH ≤ 1300 MPa due to the formation of a MoS2 and molybdenum oxide MoxOy containing tribofilm, whereby the share of MoxOy dominates compared to MoS2. Based on the results the understanding of the effect of the MoS2 + MoxOy containing tribofilm on the tribological behavior is increased.Keywords
Funding Information
- Deutsche Forschungsgemeinschaft (BO 1979/66-1)
- RWTH Aachen University
This publication has 39 references indexed in Scilit:
- Vibrational Spectroscopic Characterization of Hematite, Maghemite, and Magnetite Thin Films Produced by Vapor DepositionACS Applied Materials & Interfaces, 2010
- Compressibility measurements and phonon spectra of hexagonal transition-metal nitrides at high pressure: , , andPhysical Review B, 2007
- Raman spectroscopy studies on the thermal stability of TiN, CrN, TiAlN coatings and nanolayered TiN/CrN, TiAlN/CrN multilayer coatingsJournal of Materials Research, 2004
- Friction and wear behaviour of TiN/Au, TiN/MoS2 and TiN/TiCN/a-C:H coatingsJournal of Materials Processing Technology, 2002
- Raman spectroscopy of molybdenum oxidesPhysical Chemistry Chemical Physics, 2002
- The tribological properties of MoS2/metal composite coatings deposited by closed field magnetron sputteringSurface and Coatings Technology, 1997
- Preparation and friction characteristics of self-lubricating TiN-MoS2 composite coatingsMaterials Science and Engineering: A, 1996
- Frictional and morphological properties of AuMoS2 films sputtered from a compact targetThin Solid Films, 1984
- Second order Raman spectrum of MoS2Solid State Communications, 1974
- The single-crystal Raman spectra of nearly opaque materials. Iron(III) oxide and chromium(III) oxideJournal of the Chemical Society A: Inorganic, Physical, Theoretical, 1970