Effect of piston bowl geometry and spray angle on engine performance and emissions in HCCI engine using multi‐stage injection strategy
Authors:
- 26 May 2023
- journal article
- research article
- Published by Wiley in Environmental Progress & Sustainable Energy
- Vol. 43 (2)
Abstract
The homogeneous charge compression ignition (HCCI) and combustion chamber geometry play significant roles in improving the potential of compression ignition engines and their environmental sustainability. However, a major hindrance to the progress of HCCI technology has been the notable decline in brake thermal efficiency and emit high levels of hydrocarbon (HC) and carbon monoxide (CO) which is mainly due to the low temperatures during combustion and low post oxidation of these components. Combustion chambers like hemispherical combustion chamber (TCC) and toroidal combustion chamber (TCC) are known to provide better combustion characteristics due to their increased surface‐to‐volume ratio. Moreover, injection timing and spray position have shown a significant effect on the controlling onset of combustion and emission in HCCI engine. Therefore, the primary objective of this numerical study is to enhance the engine characteristics in HCCI mode using an HCC and TCC piston bowl geometry coupled with multistage injection and compare the results with flat piston bowl geometry. The results show that the toroidal shape piston geometry provides 3%–5% higher brake thermal efficiency compared to the conventional piston geometry. Additionally, the energy balance analysis revealed that the combination of modified piston geometry and multi stage injection improved the combustion process by reducing the energy losses due to incomplete combustion and heat transfer to the engine walls. These findings suggest that the proposed injection strategy combined with modified piston geometry has the potential to enhance the performance of HCCI engines and reduce their environmental impact.Keywords
This publication has 38 references indexed in Scilit:
- Optimization of HCCI (Homogeneous Charge Compression Ignition) engine combustion chamber walls temperature to achieve optimum IMEP using LHS and Nelder Mead algorithmEnergy, 2017
- Exergy analysis of diesel/biodiesel combustion in a homogenous charge compression ignition (HCCI) engine using three-dimensional modelRenewable Energy, 2016
- Influence of multiple fuel injection strategies on performance and combustion characteristics of a diesel fuelled HCCI engine – An experimental investigationExperimental Thermal and Fluid Science, 2016
- Numerical investigation of ethanol fuelled HCCI engine using stochastic reactor model. Part 2: Parametric study of performance and emissions characteristics using new reduced ethanol oxidation mechanismEnergy Conversion and Management, 2016
- Performance, combustion and emission characteristics of a direct injection VCR CI engine using a Jatropha curcas oil microemulsion: a comparative assessment with JCO B100, JCO B20 and petrodieselRSC Advances, 2016
- Effects of piston bowl geometry on combustion and emission characteristics of biodiesel fueled diesel enginesFuel, 2014
- Effects of open combustion chamber geometries on the performance of pongamia biodiesel in a DI diesel engineFuel, 2012
- An experimental investigation on engine speed and cyclic dispersion in an HCCI engineFuel, 2010
- Implementation of multiple-pulse injection strategies to enhance the homogeneity for simultaneous low-NOx and -soot diesel combustionInternational Journal of Thermal Sciences, 2009
- Predictions of tumble and turbulence in four-valve pentroof spark ignition enginesInternational Journal of Engine Research, 2001