Development of thin-gauge low iron loss non-oriented silicon steel
- 24 February 2021
- journal article
- research article
- Published by EDP Sciences in Metallurgical Research & Technology
- Vol. 118 (1) , 113
Abstract
Microstructure, texture, inclusions and precipitates in Fe-2.97wt%Si non-oriented silicon steel during manufacture were investigated using Scanning Electron Microscopy (SEM), Organic Solvent Electrolysis and Electron Backscattered Diffraction(EBSD)techniques. The P10/400, P15/50 and B50 of thin-gauge non-oriented silicon steel with 0.3 mm in thickness were 13.85 W/kg, 2.38 W/kg and 1.66 T, respectively. Due to annealing of hot rolled band, the size of precipitates increased. The precipitates are mostly located at the grain boundaries in the annealed sheet, the main and average size of the grain-boundary precipitates were in the range of 30 ∼ 500 nm and 63.2 nm, respectively. The pinning force caused by 100 ∼ 300 nm particles at the grain boundaries was the largest, 70 ∼ 100 nm was second. During annealing of hot rolled band, the α*-fiber texture significantly developed and γ-fiber dropped dramatically. The γ-fiber texture and α*-fiber texture composed the main textures of annealed sheet. The texture randomization would give rise to better magnetic properties compared to the γ-fiber.Keywords
This publication has 32 references indexed in Scilit:
- Recrystallized {311}〈136〉 orientation in ferrite steelsScripta Materialia, 2012
- Effect of Aluminum and Titanium Content on Grain Growth, Texture and Magnetic Properties in 3%Si Non-Oriented Electrical SteelMaterials Science Forum, 2007
- Effect of Aluminum and Titanium Content on Grain Growth, Texture and Magnetic Properties in 3%Si Non-Oriented Electrical Steel2007
- On {h,1,1}, the Recrystallisation Texture of Heavily Cold Rolled BCC SteelMaterials Science Forum, 2004
- Micro-Scale OIM Study on the Recrystallization Process of Cold Rolled α-Fiber Single CrystalMaterials Science Forum, 2004
- Evolution of recrystallization texture in nonoriented electrical steelsActa Materialia, 2003
- Influence of Al and Nb on Optimum Ti/N Ratio in Controlling Austenite Grain Growth at Reheating Temperatures.ISIJ International, 2002
- Effects of Mn and S on the grain growth and texture in cold rolled 0.5% Si steel.ISIJ International, 1990
- The solubility product of manganese sulfide in 3 pct silicon-iron at 1270 to 1670 KMetallurgical and Materials Transactions A, 1976
- Physical Theory of Ferromagnetic DomainsReviews of Modern Physics, 1949