Effect of the Working Pressure and Oxygen Gas Flow Rate on the Fabrication of Single-Phase Ag2O Thin Films
Open Access
Abstract
Ag2O thin films have been applied in various devices, such as photodetectors, photocatalysts, and gas sensors, because of their excellent thermal stability, strong electrical properties, and stable structures. However, because various phases of silver oxide exist, the fabrication of single-phase Ag2O thin films using a general deposition system is difficult. In this study, Ag2O thin films were deposited on glass substrates at different working pressures and O2 gas flow rates using a facing-target sputtering (FTS) system. After optimizing the working pressure and O2 gas flow rate, the Ag2O thin films were post-annealed at different temperatures ranging from 100 to 400 °C to improve their crystallographic properties. The X-ray diffraction patterns of the as-fabricated Ag2O thin films indicated the presence of a single phase of Ag2O, and the ultraviolet–visible (UV–vis) spectral analysis indicated transmittance of 65% in the visible light region. The optimum working pressure and O2 gas flow rate were determined to be 4 mTorr and 3.4 sccm, respectively. Finally, the effect of the post-annealing temperature on the thin film was investigated; the Ag2O peak had high intensity at 300 °C, suggesting this as the optimum post-annealing temperature.Keywords
Funding Information
- Korea Institute for Advancement of Technology (KIAT) grant funded by the Korea Government (MOTIE) (P0012451, 2019R1A6C1010016)
- Basic Science Research Capacity Enhancement Project through a Korea Basic Science Institute (National Research Facilities and equipment Center) grant funded by the Ministry of Education (P0012451, 2019R1A6C1010016)
This publication has 35 references indexed in Scilit:
- The effect of oxygen partial pressure on physical properties of nano‐crystalline silver oxide thin films deposited by RF magnetron sputteringCrystal Research and Technology, 2011
- Preparation of ZnO Based Thin Films for OLED Anode by Facing Targets Sputtering SystemMolecular Crystals and Liquid Crystals, 2011
- Enhanced visible-light absorption from Ag2O nanoparticles in nitrogen-doped TiO2 thin filmsSurface and Coatings Technology, 2011
- Stability of reactively sputtered silver oxide filmsSurface and Coatings Technology, 2005
- Effect of heat treatment on the properties of non-stoichiometric p-type nickel oxide films deposited by reactive sputteringThin Solid Films, 2005
- Influence of post-annealing treatment on the structure properties of ZnO filmsApplied Surface Science, 2005
- Study of structure and optical properties of silver oxide films by ellipsometry, XRD and XPS methodsThin Solid Films, 2004
- Electrical and optical properties of reactive DC magnetron sputtered silver oxide thin films: role of oxygenThin Solid Films, 2003
- Sol–gel synthesis and characterization of the Ag2O–SiO2 systemMaterials Science and Engineering: B, 2000
- Photoconductivity in Ag2OPhysica Status Solidi (b), 1964