Improving the Wear Resistance Properties of 7A04 Aluminum Alloy with Three Surface Modification Coatings
Open Access
Abstract
Multiple advantages, such as good formability, high specific strength, excellent thermal conductivity, and high corrosion resistance, enable aluminum alloy wide application in various fields; however, low surface hardness and poor wear resistance limit its further development. In this study, three surface modification coatings were successfully prepared on the surface of 7A04 aluminum alloy by microarc oxidation (MAO) and a combination of hard anodizing treatment (HA) and physical vapor deposition (PVD), named MAO, HA+W+DLC, and HA+Ti+ta-C, respectively. The microstructure, hardness, and tribological properties of the three coatings and the 7A04 aluminum alloy substrate were studied. The results show that the surface quality and hardness of the coated samples were higher than those of the 7A04 aluminum alloy and that the HA+Ti+ta-C coating possessed the highest hardness of 34.23 GPa. Moreover, the wear resistance of the two multilayer coatings was significantly improved during the ring-block wear tests under oil lubrication, exhibiting a wear rate of 1.51 × 10−7 mm3/N·m for HA+W+DLC and 1.36 × 10−7 mm3/N·m for HA+Ti+ta-C.Keywords
Funding Information
- State Key Lab of Advanced Metals and Materials (2022-Z17, LMQYTSKT011, 222102230033)
- Frontier Exploration Projects of Longmen Laboratory (2022-Z17, LMQYTSKT011, 222102230033)
- Scientific and Technological Project of Henan Province (2022-Z17, LMQYTSKT011, 222102230033)
This publication has 45 references indexed in Scilit:
- Wear resistance of hard anodic coatings fabricated on 5005 and 6061 aluminum alloysArchives of Civil and Mechanical Engineering, 2024
- Tribocorrosion and tribological behavior of Ti-DLC coatings deposited by filtered cathodic vacuum arcDiamond and Related Materials, 2022
- Comparative study of the application of steels and aluminium in lightweight production of automotive partsInternational Journal of Lightweight Materials and Manufacture, 2018
- Si doping enhances the thermal stability of diamond-like carbon through reductions in carbon-carbon bond length disorderCarbon, 2018
- Microstructure, mechanical and tribological characterization of CrN/DLC/Cr-DLC multilayer coating with improved adhesive wear resistanceApplied Surface Science, 2018
- Influence of graphene particles on the micro-arc oxidation behaviors of 6063 aluminum alloy and the coating propertiesApplied Surface Science, 2017
- Synergistic effect of Cu/Cr co-doping on the wettability and mechanical properties of diamond-like carbon filmsDiamond and Related Materials, 2016
- Ultra-thin nano-patterned wear-protective diamond-like carbon coatings deposited on glass using a C 60 ion beamCarbon, 2014
- Recent developments in advanced aircraft aluminium alloysMaterials & Design (1980-2015), 2014
- Raman spectra of diamondlike amorphous carbon filmsSolid State Communications, 1988