Recent Development of the 25 T All-Superconducting Magnet at IEE
- 24 January 2018
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Applied Superconductivity
- Vol. 28 (4) , 1-5
Abstract
Institute of Electrical Engineering, Chinese Academy of Sciences (IEE, CAS) has been focusing on high-field all-superconducting magnet project for many years. No-Insulation (NI) winding technology, despite of its charging delay time, makes the magnet of much higher current density, and more important, self-protected. Based on the NI dry-winding technology, a 25 T/32 mm bore superconducting magnet was designed as a combination of 15 T/ 160 mm bore Low Temperature Superconductor (LTS) magnet and a 10 T/ 32 mm bore High Temperature Superconductor (HTS) insert. A prototype coil, composed of 15 Double Pancakes (DPs), was tested at 4.2 K. Test results show that the REBCO insert can generate a 9 T central field in a 15 T background field, and 11.2 T, self-field. While fully evaluation of this insert shows that bad splice joints and premature quenches occurred during the test. We have repaired the bad splice joint, replaced some broken DPs and rebuilt some double-wound DPs to lower the current density at the top/bottom of the insert to improve the operation margin. After that, we will retest the magnet system. The latest design, construction and test results of the 25 T all-superconducting magnet will be fully introduced in this paper.Keywords
Funding Information
- National Natural Science Foundation of China (51777205, 51477167, 11545004, 51407176)
- Bureau of Frontier Sciences and Education Chinese Academy of Sciences (QYZDJ-SSW-JSC012)
This publication has 9 references indexed in Scilit:
- Progress in the development of a 25T all superconducting NMR magnetCryogenics, 2016
- 26 T 35 mm all-GdBa2Cu3O7–xmulti-width no-insulation superconducting magnetSuperconductor Science and Technology, 2016
- Critical Current Analysis of an YBCO Insert for Ultrahigh-Field All-Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2016
- Progress in the Development and Construction of a 32-T Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2016
- High Temperature Superconducting YBCO Insert for 25 T Full Superconducting MagnetIEEE Transactions on Applied Superconductivity, 2014
- Design Study on a 9.2-T NbTi Superconducting Magnet With Long-Length Uniform Axial FieldIEEE Transactions on Applied Superconductivity, 2014
- Remarkable weakness against cleavage stress for YBCO-coated conductors and its effect on the YBCO coil performancePhysica C: Superconductivity and its Applications, 2011
- Development of Wide-Bore Conduction-Cooled Superconducting Magnet System for Material Processing ApplicationsIEEE Transactions on Applied Superconductivity, 2004
- Test results and potential for upgrade of the 45 T hybrid insertIEEE Transactions on Applied Superconductivity, 2000