An Experimental Study of the Time Scales and Controlling Factors Affecting Drastic Blow-by Increases during Transient Load Changes in SI Engines
Authors:
- 14 April 2008
- conference paper
- Published by SAE International in SAE International Journal of Advances and Current Practices in Mobility
- Vol. 1
Abstract
This paper presents the follow up to previous work done by Przesmitzki and Tian [1] studying large increases in blow-by in a spark ignition engine during transient load changes. This study examines the sensitivity of such blow-by spikes to differing intake pressures, and the time spent under both high and low intake pressure. The study consisted of experiments with a single cylinder test engine utilizing 2D LIF (Two Dimensional Laser Induced Fluorescence) techniques to view real time oil transport and exchange, along with computer modeling to explain certain phenomenon observed during the experiments. The previous work found that a very large blow-by spike could occur upon a transition from low engine load to a high engine load. The hypothesis was the top ring groove was being filled with oil during low engine load. Thereafter, it was hypothesized a transition to high load resulted in radial collapse of the top ring, and the subsequent blow by spike. The results of this study confirm through visual observation that the blow-by spikes were indeed the result of top ring radial collapse in the tested engine. They also show top ring radial collapse and the subsequent blow-by spike is ultimately the result of oil transport between the piston and top ring groove. There is a clear coupling between oil transport and gas transport. The results also suggest ring rotation may be a primary source of spreading oil in the top ring groove in the circumferential direction.Keywords
This publication has 16 references indexed in Scilit:
- Oil Transport Inside the Power Cylinder During Transient Load ChangesSAE International Journal of Advances and Current Practices in Mobility, 2007
- Oil Transport in the Piston Ring Pack (Part I): Identification and Characterization of the Main Oil Transport Routes and MechanismsSAE International Journal of Advances and Current Practices in Mobility, 2003
- Dynamic behaviours of piston rings and their practical impact. Part 1: Ring flutter and ring collapse and their effects on gas flow and oil transportProceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2002
- An Experimental Study on Phenomena of Piston Ring CollapseSAE International Journal of Advances and Current Practices in Mobility, 2002
- Analysis of Oil Consumption Behavior during Ramp Transients in a Production Spark Ignition EngineSAE International Journal of Advances and Current Practices in Mobility, 2001
- Real-Time Transient and Steady-State Measurement of Oil Consumption for Several Production SI-EnginesSAE International Journal of Advances and Current Practices in Mobility, 2001
- Challenges Involved in Piston Top Ring Designs for Modern SI EnginesJournal of Engineering for Gas Turbines and Power, 2000
- Variation of Piston Ring Oil Film Thickness in an Internal Combustion Engine - Comparison Between Thrust and Anti-Thrust SidesSAE International Journal of Advances and Current Practices in Mobility, 1998
- Observation of Transient Oil Consumption with In-Cylinder VariablesSAE International Journal of Advances and Current Practices in Mobility, 1996
- Study of Transient Oil Consumption of Automotive EngineSAE International Journal of Advances and Current Practices in Mobility, 1989