Optical Simulation Study of Perovskite/CIGS Tandem Solar Cells With Reduced Graphene Oxide Layers
Authors:
Open Access
- 4 May 2022
- journal article
- research article
- Published by Frontiers Media SA in Frontiers in Photonics
- Vol. 3
Abstract
Tandem solar cells present a promising solution to overcome the Schottky–Queisser efficiency limit of single-junction solar cells. In this article, an all–thin-film tandem solar cell based on perovskite (PK) top cell and chalcopyrite Cu (In, Ga) Se2 (CIGS) bottom cell is researched. Device optical simulations are validated on the top and bottom cells and employed for the analysis of PK/CIGS tandem cells. In particular, the optical effects of introduced laser reduced graphene oxide (rGO) layers at two positions in the tandem cell: 1) at the position between the top PK and bottom CIGS cell and 2) underneath the front transparent electrode. The purpose of introducing rGO layers is to improve the optoelectrical properties of the device, based on the tunable electronic and optical characteristics of rGO layers. Optical simulation results show that the parasitic absorption in rGO layers may noticeably affect the optical performance of the tandem cell if the layers are not optimized. The use of a thin and a few nanometer-thick rGO is suggested from the analysis if its parasitic absorption is not reduced. Directions for further optimization of optical rGO, including the reduction of parasitic absorption and tuning of the real part of the refractive index, are performed.Keywords
Funding Information
- The Slovenian Research and Innovation Agency (P2-0415 J2-1727)
- Graphene Flagship (JTC-2019-013)
This publication has 34 references indexed in Scilit:
- Flexible Organic Photovoltaic Cells with In Situ Nonthermal Photoreduction of Spin‐Coated Graphene Oxide ElectrodesAdvanced Functional Materials, 2013
- Light Management in Thin-Film Solar Cell2012
- Pulsed laser assisted reduction of graphene oxideCarbon, 2011
- Modeling plasmonic scattering combined with thin-film opticsNanotechnology, 2010
- Laser Processing in Industrial Solar Module ManufacturingJournal of Laser Micro/Nanoengineering, 2010
- Optical and electrical modeling of thin-film silicon solar cellsJournal of Materials Research, 2008
- Optical and electrical modeling of Cu(In,Ga)Se2 solar cellsOptical and Quantum Electronics, 2007
- Analysis of light scattering in amorphous Si:H solar cells by a one‐dimensional semi‐coherent optical modelProgress in Photovoltaics: Research and Applications, 2002
- Optical modeling of a-Si:H solar cells deposited on textured glass/SnO2 substratesJournal of Applied Physics, 2002
- Detailed Balance Limit of Efficiency ofp-nJunction Solar CellsJournal of Applied Physics, 1961