The Effect of Laser Remelting during SLM on Microstructure and Mechanical Properties of CoCrFeNiNb0.25
Open Access
Abstract
A sub-eutectic high-entropy alloy composed of CoCrFeNiNb0.25 was prepared using a combination of mechanical powder mixing and selective laser melting (SLM). The mechanical properties of the alloy were enhanced by employing an interlayer laser remelting process. This study demonstrates the feasibility of using mechanical mixing and SLM to form an CoCrFeNiNb0.25 alloy. The interlayer laser remelting process can effectively promote the melting of Nb particles introduced by mechanical mixing, release the stresses near the unfused Nb particles, and reduce their degradation of the specimen properties. The results indicate that the CoCrFeNiNb0.25 alloy, prepared using the interlayer laser remelting process, had an average microhardness of 376 HV, a tensile strength of 974 MPa, and an elongation at break of 10.51%. This process offers a viable approach for rapidly adjusting the composition of high-entropy alloys for SLM forming.Keywords
This publication has 26 references indexed in Scilit:
- The Role of Carbon in Wear Resistance of CoCrFeNiTi0.5 High-Entropy Alloy LayerJournal of Materials Engineering and Performance, 2024
- Formation mechanism of interdiffusion layer and mechanical properties of Al0.6CoCrFeNi high-entropy alloy/Ti compositesJournal of Alloys and Compounds, 2023
- Densification mechanism of Ti-Al-Nb alloys pressurelessly sintered from Al-Nb master alloy powder for cost-effective manufacturingJournal of Alloys and Compounds, 2022
- Microstructures and room temperature tensile properties of as-cast and directionally solidified AlCoCrFeNi2.1 eutectic high-entropy alloyIntermetallics, 2020
- Processing Parameter Effects on Residual Stress and Mechanical Properties of Selective Laser Melted Ti6Al4VJournal of Materials Engineering and Performance, 2018
- Selective laser melting of an equiatomic CoCrFeMnNi high-entropy alloy: Processability, non-equilibrium microstructure and mechanical propertyJournal of Alloys and Compounds, 2018
- Microstructures and mechanical properties of C-containing FeCoCrNi high-entropy alloy fabricated by selective laser meltingIntermetallics, 2018
- Directly cast bulk eutectic and near-eutectic high entropy alloys with balanced strength and ductility in a wide temperature rangeActa Materialia, 2017
- Designing eutectic high entropy alloys of CoCrFeNiNb xJournal of Alloys and Compounds, 2016
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004