Force Control Using Internal Spring in Electrostatic Linear Motors and Switching Between Position and Force Control
- 22 May 2024
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE/ASME Transactions on Mechatronics
- Vol. 29 (4) , 3184-3192
Abstract
This article proposes a method for controlling force and position in a synchronous direct-drive electrostatic linear motor. Using a spring-like behavior of synchronous motors, the proposed controller regulates the contact force in a manner similar to that of series elastic actuators. Discussions regarding similarities and differences between series elastic actuators and the proposed method imply that their dynamic behaviors are different. The proposed controller consists of a force control part and a position control part, one of which is automatically selected based on the operating conditions. The position and force controllers each independently command the velocity based on the position or force error. The lower of the two velocities is selected, allowing a smooth automatic transition between the two control modes. Based on the selected velocity, the driving signal is calculated under the assumption of synchronous operation and fed to the actuator. The proposed control method is simulated and experiments are performed using prototype electrostatic linear motors. The experimental results confirm the smooth transition between the position and force control modes, as well as the good controllability of the contact force.Keywords
This publication has 26 references indexed in Scilit:
- 2-DOF Robot Arm with Variable Torque Limiters Realized by Electrostatic Film Motors2023
- A High Performance Muscle-like Actuator using Multi-layer Electrostatic Film Motors2022
- Development and Analysis of a Biped Robot with Prismatic Compliance2022
- Quasi-Direct Drive for Low-Cost Compliant Robotic Manipulation2019
- Toward self-sensing of an electrostatic film motor using driving currents2018
- Working Together: A Review on Safe Human-Robot Collaboration in Industrial EnvironmentsIEEE Access, 2017
- Safety-Function Design for the Control System of a Human-Cooperative Robot Based on Functional Safety of Hardware and SoftwareIEEE/ASME Transactions on Mechatronics, 2014
- A built-in displacement sensor for an electrostatic film motorMeasurement Science and Technology, 2006
- Modeling and identification of an electrostatic motorPrecision Engineering, 2006
- Series elastic actuators for high fidelity force controlIndustrial Robot: the international journal of robotics research and application, 2002