Design and calculation of test stand for testing personal fall protection equipment according to EN 364
Open Access
- 1 January 2026
- journal article
- Published by Centre for Evaluation in Education and Science (CEON/CEES) in Engineering Today
- Vol. 5 (1) , 37-42
Abstract
This paper presents the design and calculation of a test stand intended for testing personal fall protection equipment in accordance with the requirements of the international standard EN 364. The objective of the study was to develop a reliable, safe, and structurally adequate test stand capable of performing both static and dynamic tests on components of fall arrest systems, including different types of personal fall protection systems, fall-arresters, anchor lines, safety harnesses, lanyards, energy absorbers, and connecting elements. The paper analyzes the requirements of EN 364 and defines the functional and structural characteristics of the test stand. Particular emphasis was placed on the static strength of the supporting structure, which was designed to withstand the maximum prescribed test forces without permanent deformation or structural failure, ensuring an adequate safety factor under the most unfavorable loading conditions. Furthermore, the dynamic performance of the test stand was analyzed through the evaluation of its natural frequencies, in accordance with standard requirements. The obtained calculation results confirm that the designed test stand fully complies with the requirements of EN 364 and enables accurate, reliable, and safe testing of personal fall protection equipment, thereby contributing to improved occupational safety and compliance with relevant standards.Keywords
Funding Information
- Ministarstvo Prosvete, Nauke i Tehnološkog Razvoja (451-03-68/2020-14/200108)
This publication has 8 references indexed in Scilit:
- Methodology of testing guided-type fall arresters with rail-based rigid anchor linesEngineering Today, 2025
- Safety at Height2024
- Minimum Clearance Distance in Fall Arrest Systems with Energy Absorber LanyardsInternational Journal of Environmental Research and Public Health, 2021
- Optimization on Personal Fall Arrest Systems. Experimental Dynamic Studies on Lanyard PrototypesInternational Journal of Environmental Research and Public Health, 2020
- EXPERIMENTAL TESTS ON PERSONAL SAFETY DEVICES FOR FALLS FROM HEIGHT2018
- Fall Prevention and Protection2016
- Tensile testing of metallic materials2013
- Assessment of Fall-Arrest Systems for Scissor Lift OperatorsHuman Factors: The Journal of the Human Factors and Ergonomics Society, 2011