The effect of contaminating media on the static and dynamic mechanical resilience of dental implant abutments' screws: In vitro study
- 7 September 2023
- journal article
- research article
- Published by Wiley in Clinical Implant Dentistry and Related Research
- Vol. 26 (2) , 289-298
Abstract
Introduction: This in vitro study aims to biomechanically evaluate the influence of medium contamination for example, saliva, blood, chlorhexidine (liquid and gel), and fluoride mouthwash on the biomechanical behavior of implant abutments' screws under static and dynamic loading.Methods: Forty five Ti6Al4V commercial dental implants and abutments were tested in this study. Two main mechanical tests were carried out in the selected media. The first, static, aimed to evaluate the torque loss after the first tightening. The second, dynamic, involved a random cyclic load range between 0 and 200 N to evaluate torque loss due to mastication. In addition, metallographic longitudinal and cross‐sections of the abutment‐implant apparatus were examined to evaluate the abutment screw–abutment‐implant interface.Results: The static torque test showed that irrespective of the media, no statistical difference in static torque loss was found prior to dynamic loading. For the dynamic tests, torque‐angle evolution analysis during tightening to 30 Ncm and after the spectrum loading, showed the same global mechanical behavior for all media, but the statistical analysis indicated a difference between the groups in reverse torque values (RTV) and in the torque loss due to dynamic loading. The medium groups CHX, CHX‐gel, and Fluoride mouthwash, showed a meaningful torque loss due to loading, but the medium groups, control (no medium), blood and saliva showed an opposite trend and required a higher torque to open the abutment screws. The microstructural analysis revealed clear signs of cold‐welding/galling, post‐dynamic loading in these latter groups.Conclusions: The presence of lubrication/contamination media (CHX mouthwash/CHX‐gel/Fluoride mouthwash) reduces the preload generated due to tightening but prevents damage due to galling. The observed reduction of RTV clearly emphasizes the need for frequent abutment screw retightening for implant‐supported prosthetic long‐term stability.Keywords
This publication has 21 references indexed in Scilit:
- Preload loss of abutment screws after dynamic fatigue in single implant-supported restorations. A systematic reviewJournal of Clinical and Experimental Dentistry, 2017
- Random spectrum loading of dental implants: An alternative approach to functional performance assessmentJournal of the Mechanical Behavior of Biomedical Materials, 2016
- Effect of Fluid Contamination on Reverse Torque Values in Bone-Level ImplantsImplant Dentistry, 2014
- Influence of lubricant on screw preload and stresses in a finite element model for a dental implantThe Journal of Prosthetic Dentistry, 2014
- Improvements in Implant Dentistry over the Last Decade: Comparison of Survival and Complication Rates in Older and Newer PublicationsThe International Journal of Oral and Maxillofacial Implants, 2014
- Correlation between microleakage and screw loosening at implant-abutment connectionThe Journal of Advanced Prosthodontics, 2014
- Effect of mechanical loading on the removal torque of different types of tapered connection abutments for dental implantsThe Journal of Prosthetic Dentistry, 2013
- Titanium Integration With Bone, Welding, and Screw Head Destruction Complicating Hardware Removal of the Distal Radius: Report of 2 CasesThe Journal of Hand Surgery, 2012
- The Relationship Between Implant Preload and Screw Loosening on Implant-supported ProsthesesJournal of Oral Implantology, 2002
- Viscosity of whole salivaActa Odontologica Scandinavica, 1998