Synthesis of Tantalum Carbide Using Purified Hexane by Titanium Powder
Open Access
Abstract
Hexane is a safe, efficient, and cost-effective alternative to other commercial hydrocarbons for gaseous carburization; however, commercial hexane is not sufficiently pure. Titanium powder can remove oxygen-containing impurities from commercial hexane; however, research on the use of titanium powder remains limited. We investigated the purification of hexane using titanium, copper, and aluminum powders and used the purified hexane for the gaseous carburization of tantalum. Ti exhibited lower activation energy for oxidation (1.55 kJ/mol) than Cu (91.09 kJ/mol) and Al (150.25 kJ/mol) and a significantly higher oxidation rate (0.0269 g/h) in hexane at room temperature than Cu (0.0018 g/h) and Al (0.0001 g/h). The carbon content in tantalum carburized using the purified hexane was comparable to that carburized using unpurified hexane (approximately 6.22%); however, its oxygen content was significantly lower (1.39%), which indicates that the produced tantalum carbide has a higher purity. X-ray diffraction results revealed that the oxidation products of tantalum, such as Ta2O, TaO2, Ta0.8O2, and Ta2O5, were absent in the sample carburized using the purified hexane. Therefore, Ti powder can effectively remove oxygen-containing impurities from commercial hexane and facilitate its use as an effective carburizing medium for the synthesis of high-purity tantalum carbide.Keywords
Funding Information
- Korea Institute of Materials Science (PNK 7190)
This publication has 28 references indexed in Scilit:
- Oxidation of WC-TiC-TaC-Co hard materials at relatively low temperatureInternational Journal of Refractory Metals and Hard Materials, 2015
- Densification and mechanical properties of TaC-based ceramicsMaterials Science and Engineering: A, 2009
- Production of Refractory Metal Powders2009
- A photoelectron spectroscopic study of the carburization of MoO3Applied Surface Science, 2007
- Preparation of tantalum carbonitride by self-propagating high-temperature synthesis of Ta-C system in nitrogenCeramics International, 2006
- Polyhedral Shapes of CeO2 NanoparticlesThe Journal of Physical Chemistry B, 2003
- Tantalum and its alloysInternational Journal of Refractory Metals and Hard Materials, 1995
- The influence of surface segregation of oxygen or nitrogen on the decompositio of hydrocarbons on transition metalsMaterials Science and Engineering, 1980
- The kinetics and mechanisms of the absorption of carbon by niobium and tantalum in a methane or acetylene streamJournal of the Less Common Metals, 1974
- On Carburization of Tantalum OxideJournal of the Japan Society of Powder and Powder Metallurgy, 1965