Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Seon-Min Hwang has a total of 13 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Carburization of Tantalum Metal Powder Using Activated Carbon

    by Seonmin Hwang, Dongwon Lee

    Tantalum carbide (TaC) is a highly refractory material with a melting point of 4153 K, making it attractive for applications requiring excellent hardness and thermal stability. In this study, we investigated the carburization behavior of high-purity tantalum metal powder synthesized by magnesium thermal reduction of Ta2O5, using activated carbon and graphite as carbon sources under high vacuum. Carburization was conducted at 1100–1400 °C for durations of 5–20 h. Carbon contents were analyzed via combustion analysis, and activation energies were calculated based on Arrhenius plots. The results showed that the activated carbon significantly enhanced carbon uptake compared to graphite due to its higher porosity and surface reactivity. The formation and transformation of carbide phases were confirmed via X-ray diffraction, revealing a progression from Ta to Ta2C and eventually to single-phase TaC with increasing carbon content. Scanning electron microscopy (SEM) analysis showed that fine particles formed on the surface as carbon content increased, indicating local nucleation of TaC. Although the theoretical carbon content of stoichiometric TaC (6.22 wt.%) was not fully achieved, the near-theoretical lattice parameter (4.4547 Å) was approached. These findings suggest that activated carbon can serve as an effective carburizing agent for the synthesis of TaC under vacuum conditions.


  • Open Access

    Comparison of the Magnesiothermic Reduction Behavior of Nb2O5 and Ti2Nb10O29

    by Jiwon Hong, Seonmin Hwang, Namhyun Kang, Dongwon Lee

    Nb-Ti binary alloys are widely employed as high value-added materials in the manufacture of super heat-resistant alloys, biomaterials, and superconductors. Therefore, there is significant interest to produce Nb-Ti master alloys in a cost-effective manner. In this study, we investigated the magnesiothermic reduction of Nb2O5 and Ti2Nb10O29 over the temperature range of 1073 to 1223 K and comparatively evaluated the reaction outcomes. The reduction product was composed of metal (Nb or Nb-Ti) particles and MgO, which covered the surface of the reduced metal particles. After the reduction reaction, the surface MgO phase was removed by pickling with hydrochloric acid (HCl) to finally recover the Nb metal or Nb-Ti alloy as a pure product. Scanning electron microscopy and X-ray diffraction analyses of the pure Nb metal and Nb-Ti alloy powders revealed that the reduction of both raw materials was successful at temperatures exceeding 1173 K. Reaction kinetics analysis revealed that the activation energy for the reduction of the mixed metal oxide (Ti2Nb10O29) is lower than that of Nb2O5 reduction. This is because of the different reaction mechanism behaviors during reduction and the different thermodynamic stabilities of the precursors.


  • Open Access

    Synthesis of Tantalum Carbide Using Purified Hexane by Titanium Powder

    by Seon-Min Hwang, Ji-Won Hong, Yong-Ho Park, Dong-Won Lee

    Hexane is a safe, efficient, and cost-effective alternative to other commercial hydrocarbons for gaseous carburization; however, commercial hexane is not sufficiently pure. Titanium powder can remove oxygen-containing impurities from commercial hexane; however, research on the use of titanium powder remains limited. We investigated the purification of hexane using titanium, copper, and aluminum powders and used the purified hexane for the gaseous carburization of tantalum. Ti exhibited lower activation energy for oxidation (1.55 kJ/mol) than Cu (91.09 kJ/mol) and Al (150.25 kJ/mol) and a significantly higher oxidation rate (0.0269 g/h) in hexane at room temperature than Cu (0.0018 g/h) and Al (0.0001 g/h). The carbon content in tantalum carburized using the purified hexane was comparable to that carburized using unpurified hexane (approximately 6.22%); however, its oxygen content was significantly lower (1.39%), which indicates that the produced tantalum carbide has a higher purity. X-ray diffraction results revealed that the oxidation products of tantalum, such as Ta2O, TaO2, Ta0.8O2, and Ta2O5, were absent in the sample carburized using the purified hexane. Therefore, Ti powder can effectively remove oxygen-containing impurities from commercial hexane and facilitate its use as an effective carburizing medium for the synthesis of high-purity tantalum carbide.


  • Metallic Silicon Powder Produced by Vacuum Decomposition of Magnesium Silicide Prepared by Magnesiothermic Reduction

    by Seon-Min Hwang, Su-Jin Park, Gwang-Tae Kim, Ha-Neul Kim, Jae-Woong Ko, Yong-Ho Park, Dong-Won Lee

    Metallic silicon powder has been widely used for the production of various industrial materials and parts such as refractory ceramics, solar cells, military parts and so on. Herein, we attempted to prepare pure silicon powder from SiO2 by a magnesium thermal reduction process. A mixed-phase, Mg2Si + MgO, was obtained by the reduction of SiO2 powder by magnesium gas at 1223 K for 20 h. To extract pure silicon powder, Mg was separated by evaporation under vacuum through Mg2Si decomposition above 1073 K, leading to the formation of Si + MgO, and the MgO by-product was eliminated by dissolution in an aqueous hydrochloric acid solution. X-ray diffraction analysis confirmed the formation of pure Si powder and particle size shown in microstructure and oxygen content were analyzed to be 1∼5 µm and 1.5∼6 wt.%, respectively.


  • Metallic Niobium Powder Reduced by Atmospheric Magnesium Gas with Niobium Pentoxide Powder

    by Su-Jin Park, Seon-Min Hwang, Jei-Pil Wang, Young-Guk Son, Dong-Won Lee

    It was tried to find the optimal condition to prepare the metallic niobium powder with minimal oxygen content by atmospheric magnesium-gas reduction of niobium pentoxide (Nb2O5) powder at 1073–1223 K, which are industrially moderate and low temperature ranges until maximally 80 h inside the chamber held under the argon circumstances of 110 kPa. Magnesium oxide of the by-product of the reduction, was dissolved and removed fully by dissolving in a 10% aqueous hydrochloric acid solution. The particle size of the niobium powder reduced for 20 h was slightly increased within the range of 200∼600 nm according to increase of reduction temperatures. And such fine particles were further coarsened to near 1 µm by increase of reduction times until 80 h at 1173 K, which is thought to be the most suitable for magnesium-gas reduction to be applied in industry. The reduction time satisfied for a maximal reduction effect was found to be 60 hours as the oxygen content was then minimally saturated to about 0.42 wt.%. Furthermore, the hydrogen contamination due to acid leaching of 0.28 wt.% was fully removed by dehydrogenation, which was a heat treatment performed under vacuum at 827 K for 2 h; this resulted in the formation of metallic niobium powder.


  • Open Access

    Extraction of Tantalum Powder via the Magnesium Reduction of Tantalum Pentoxide

    by Seon-Min Hwang, Jei-Pil Wang, Dong-Won Lee

    The metallic tantalum powder was successfully synthesized via reduction of tantalum pentoxide (Ta2O5) with magnesium gas at 1073~1223 K for 10 h inside the chamber held under an argon atmosphere. The powder obtained after reduction shows the Ta–MgO mixed structure and that the MgO component was dissolved and removed fully via stirring in a water-based HCl solution. The particle size in the tantalum powder obtained after acid leaching was shown to be in a range of 50~300 nm, and the mean internal crystallite sizes measured by the Scherrer equation varied from 11.5 to 24.7 nm according to the increase in reduction temperatures. The temperature satisfactory for a maximal reduction effect was found to be 1173 K because the oxygen content was minimally saturated to about 1.3 wt %.