Effect of Carbon Fiber Addition on the Microstructure and Wear Resistance of Laser Cladding Composite Coatings
Open Access
Abstract
In this study, the effect of carbon fibers (CFs) on the microstructure and wear resistance of Fe-based alloy coating produced by laser cladding was investigated by X-ray diffractometer (XRD), scanning electron microscopy (SEM), energy-dispersive spectrometer (EDS), and wear tester. The results indicated that with the addition of CFs, the microstructure of the composite coating mainly transformed from α-Fe cellular dendrites and γ-Fe/(Cr, Fe)7C3/CrB eutectics to bulk-like (Cr, Fe)7C3, nano-size B4C, and γ-(Fe, Ni)/(Cr, Fe)23C6 lamellar eutectics. Additionally, the microhardness and wear resistance of the composite coating compared with the original coating both increased by approximately two times. The original coating showed the dominant wear mechanisms of micro-cutting and serious brittle spalling, while the composite coating with CFs showed the main wear mechanism of slight scratching.Keywords
This publication has 26 references indexed in Scilit:
- Effect of process parameters on the microstructure evolution and wear property of the laser cladding coatings on Ti-6Al-4V alloyJournal of Alloys and Compounds, 2017
- NiCrSiBC coatings: Effect of dilution on microstructure and high temperature tribological behaviorWear, 2016
- In-situ synthesized Ni–Zr intermetallic/ceramic reinforced composite coatings on zirconium substrate by high power diode laserJournal of Alloys and Compounds, 2015
- Microstructure and properties of Fe-based composite coating by laser cladding Fe–Ti–V–Cr–C–CeO2 powderOptics & Laser Technology, 2015
- Scanning velocity influence on microstructure, microhardness and wear resistance performance of laser deposited Ti6Al4V/TiC compositeMaterials & Design (1980-2015), 2013
- Effect of laser scanning speed on TiN/TiB–Ti based compositeSurface Engineering, 2013
- A comparative study of laser cladding high temperature wear-resistant composite coating with the addition of self-lubricating WS2 and WS2/(Ni–P) encapsulationJournal of Materials Processing Technology, 2013
- Microstructure and wear behaviors of laser clad NiCr/Cr3C2–WS2 high temperature self-lubricating wear-resistant composite coatingApplied Surface Science, 2012
- Microstructural characteristics of laser clad coatings with rare earth metal elementsJournal of Materials Processing Technology, 2003
- Structural and mechanical characterization of Ti/TiC cermet coatings synthesized by laser meltingSurface and Coatings Technology, 1997