Kinetic‐Coordinated Mechano‐Electrochemical Steady‐State in All‐Solid‐State Si–Se Batteries
Open Access
- 30 September 2026
- journal article
- research article
- Published by Wiley in Carbon Neutralization
- Vol. 5 (6) , e70206
Abstract
Mechanical degradation induced by electrode volume fluctuations remains a fundamental barrier for all‐solid‐state lithium‐ion batteries (ASSLBs). Here, a kinetic‐coordinated mechano‐electrochemical steady‐state architecture is proposed for Li x Si–Se ASSLBs. It dynamically counterbalances the Se cathode volumetric expansion with the continuous contraction of the Li x Si anode during cycling. The conversion kinetics of Se promote temporal coordination with the anode, thereby mitigating transient mechanical imbalance. This volumetric and kinetic dual‐matching results in a pressure change of −0.137 MPa at the discharge–charge transition in the 20th cycle. Its absolute magnitude is more than one order of magnitude lower than that of the Li–Se cell (−2.721 MPa). The mechanically stabilized interfaces suppress long‐range cracking and help maintain continuous solid–solid contact. Consequently, the Li x Si–Se system delivers excellent specific capacities of 579.1, 510.4, 369.4, 260.1, and 170.5 mAh g −1 at 0.1, 0.2, 0.5, 1, and 2C, respectively. More importantly, scaled‐up 10 × 10 cm 2 pouch cells achieve a high reversible capacity of 1.13 Ah. Their peak capacity of 1.16 Ah corresponds to a calculated gravimetric energy density of 274.15 Wh kg −1 based on the combined masses of the cathode, solid‐state electrolyte, and anode. This work establishes this dual‐matching paradigm as a general design principle for overcoming interfacial mechanical failures in high‐energy ASSLBs.Keywords
Funding Information
- National Key Research and Development Program of China (2023YFC3009502)
This publication has 37 references indexed in Scilit:
- Understanding stack pressure effects in sulfide electrolyte-based all-solid-state battery interfaces and componentsDiscover Electrochemistry, 2026
- Overcoming Kinetic Limitations of Silicon Anodes Toward Fast‐Charging Sulfide‐Based All‐Solid‐State BatteriesSmall, 2026
- Using a Zero‐Strain Reference Electrode to Distinguish Anode and Cathode Volume Changes in a Solid‐State BatteryAdvanced Materials Interfaces, 2025
- Li Alloys in All Solid-State Lithium Batteries: A Review of Fundamentals and ApplicationsElectrochemical Energy Reviews, 2024
- In Situ‐Constructed LixMoS2 with Highly Exposed Interface Boosting High‐Loading and Long‐Life Cathode for All‐Solid‐State Li–S BatteriesEnergy & Environmental Materials, 2023
- Advanced all-solid-state lithium-selenium batteries enabled by selenium-nitrogen doped hierarchic meso-microporous carbon nanospheres composite cathodeChinese Chemical Letters, 2022
- Epitaxial Growth of Nanostructured Li2Se on Lithium Metal for All Solid‐State BatteriesAdvanced Science, 2021
- State‐Of‐The‐Art and Future Challenges in High Energy Lithium–Selenium BatteriesAdvanced Materials, 2021
- Recent progress in Li–S and Li–Se batteriesRare Metals, 2017
- A Robust Ion‐Conductive Biopolymer as a Binder for Si Anodes of Lithium‐Ion BatteriesAdvanced Functional Materials, 2015