Tao Huang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Tao Huang has a total of 15 co-authors. Here are the top co-authors by number of shared publications:
Caiting Yuan
College of Materials Science and Technology, Centre for Hydrogenergy Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu China
2 shared publications- Tengfei Zhang
College of Materials Science and Technology Nanjing University of Aeronautics and Astronautics Nanjing 210016 China
2 shared publications Zhanning Wu
College of Materials Science and Technology, Centre for Hydrogenergy Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu China
2 shared publications- Fangqin Guo
Graduate School of Advanced Science and Engineering Hiroshima University Higashi‐Hiroshima Japan
1 shared publication Peng Liu
College of Materials Science and Technology, Centre for Hydrogenergy Nanjing University of Aeronautics and Astronautics Nanjing Jiangsu China
1 shared publicationTakayuki Ichikawa
Graduate School of Advanced Science and Engineering Hiroshima University Hiroshima Japan
1 shared publication
Latest Publications
- Open Access
- 30 September 2026
- Published by Wiley in Carbon Neutralization
- Vol. 5 (6) , e70206
Kinetic‐Coordinated Mechano‐Electrochemical Steady‐State in All‐Solid‐State Si–Se Batteries
Mechanical degradation induced by electrode volume fluctuations remains a fundamental barrier for all‐solid‐state lithium‐ion batteries (ASSLBs). Here, a kinetic‐coordinated mechano‐electrochemical steady‐state architecture is proposed for Li x Si–Se ASSLBs. It dynamically counterbalances the Se cathode volumetric expansion with the continuous contraction of the Li x Si anode during cycling. The conversion kinetics of Se promote temporal coordination with the anode, thereby mitigating transient mechanical imbalance. This volumetric and kinetic dual‐matching results in a pressure change of −0.137 MPa at the discharge–charge transition in the 20th cycle. Its absolute magnitude is more than one order of magnitude lower than that of the Li–Se cell (−2.721 MPa). The mechanically stabilized interfaces suppress long‐range cracking and help maintain continuous solid–solid contact. Consequently, the Li x Si–Se system delivers excellent specific capacities of 579.1, 510.4, 369.4, 260.1, and 170.5 mAh g −1 at 0.1, 0.2, 0.5, 1, and 2C, respectively. More importantly, scaled‐up 10 × 10 cm 2 pouch cells achieve a high reversible capacity of 1.13 Ah. Their peak capacity of 1.16 Ah corresponds to a calculated gravimetric energy density of 274.15 Wh kg −1 based on the combined masses of the cathode, solid‐state electrolyte, and anode. This work establishes this dual‐matching paradigm as a general design principle for overcoming interfacial mechanical failures in high‐energy ASSLBs.
- 30 September 2026
- Published by Wiley in Carbon Neutralization
- Vol. 5 (6) , e70206
Open AccessKinetic‐Coordinated Mechano‐Electrochemical Steady‐State in All‐Solid‐State Si–Se Batteries
Mechanical degradation induced by electrode volume fluctuations remains a fundamental barrier for all‐solid‐state lithium‐ion batteries (ASSLBs). Here, a kinetic‐coordinated mechano‐electrochemical steady‐state architecture is proposed for Li x Si–Se ASSLBs. It dynamically counterbalances the Se cathode volumetric expansion with the continuous contraction of the Li x Si anode during cycling. The conversion kinetics of Se promote temporal coordination with the anode, thereby mitigating transient mechanical imbalance. This volumetric and kinetic dual‐matching results in a pressure change of −0.137 MPa at the discharge–charge transition in the 20th cycle. Its absolute magnitude is more than one order of magnitude lower than that of the Li–Se cell (−2.721 MPa). The mechanically stabilized interfaces suppress long‐range cracking and help maintain continuous solid–solid contact. Consequently, the Li x Si–Se system delivers excellent specific capacities of 579.1, 510.4, 369.4, 260.1, and 170.5 mAh g −1 at 0.1, 0.2, 0.5, 1, and 2C, respectively. More importantly, scaled‐up 10 × 10 cm 2 pouch cells achieve a high reversible capacity of 1.13 Ah. Their peak capacity of 1.16 Ah corresponds to a calculated gravimetric energy density of 274.15 Wh kg −1 based on the combined masses of the cathode, solid‐state electrolyte, and anode. This work establishes this dual‐matching paradigm as a general design principle for overcoming interfacial mechanical failures in high‐energy ASSLBs.
- Open Access
High‐Performance All‐Solid‐State Silicon–Sulfur Batteries Enabled by Li 4 (BH 4 ) 3 I Hydride Electrolyte
Silicon anodes hold great potential for next‐generation battery systems due to their significantly higher capacity compared with conventional graphite anodes. However, the low electrochemical potential of lithiated phases in lithium–silicon alloys drives spontaneous electrolyte reduction, resulting in interfacial instability. Herein, a high‐performance silicon composite anode assembled with a Li 4 (BH 4 ) 3 I hydride electrolyte is developed. Prelithiation compensates for initial irreversible lithium consumption, while the combination of the Li 22 Si 5 alloy and hydride electrolyte suppresses interfacial degradation, enabling an initial Coulombic efficiency of 99.6%. In silicon–sulfur full cells, the opposite volume changes of the Li 22 Si 5 anode and sulfur cathode dynamically compensate for stress evolution during cycling and maintain intimate interfacial contact and structural integrity, enabling this configuration to deliver an ultra‐high areal capacity of 23.88 mAh cm −2 and retain 63.2% of its capacity after 1000 cycles, without observable cracking or structural degradation. These results provide an effective interfacial and structural design strategy for high‐performance silicon‐based anodes in all‐solid‐state batteries.
Open AccessHigh‐Performance All‐Solid‐State Silicon–Sulfur Batteries Enabled by Li 4 (BH 4 ) 3 I Hydride Electrolyte
Silicon anodes hold great potential for next‐generation battery systems due to their significantly higher capacity compared with conventional graphite anodes. However, the low electrochemical potential of lithiated phases in lithium–silicon alloys drives spontaneous electrolyte reduction, resulting in interfacial instability. Herein, a high‐performance silicon composite anode assembled with a Li 4 (BH 4 ) 3 I hydride electrolyte is developed. Prelithiation compensates for initial irreversible lithium consumption, while the combination of the Li 22 Si 5 alloy and hydride electrolyte suppresses interfacial degradation, enabling an initial Coulombic efficiency of 99.6%. In silicon–sulfur full cells, the opposite volume changes of the Li 22 Si 5 anode and sulfur cathode dynamically compensate for stress evolution during cycling and maintain intimate interfacial contact and structural integrity, enabling this configuration to deliver an ultra‐high areal capacity of 23.88 mAh cm −2 and retain 63.2% of its capacity after 1000 cycles, without observable cracking or structural degradation. These results provide an effective interfacial and structural design strategy for high‐performance silicon‐based anodes in all‐solid‐state batteries.