Preparation and characterization of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) grafting of vinyl chloride resin with good impact resistance
Authors:
- 12 August 2003
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (3) , 643-649
Abstract
Crosslinked poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA–EHA)] latex was synthesized by seeded emulsion polymerization. P(BA–EHA)/poly(vinyl chloride) (PVC) composite latex was prepared using P(BA–EHA) latex as the seed. The effects of the amount of P(BA–EHA) on the latex particle diameters and mechanical properties of the materials are discussed. The grafting efficiency (GE) of P(BA–EHA)‐grafted vinyl chloride (VC) in the synthesized resin was investigated, and the GE increased with an increasing P(BA–EHA)/VC ratio. The morphology of P(BA–EHA)/PVC was characterized using TEM, SEM, and DMA. TEM indicated that the particles of the P(BA–EHA)/PVC composite latex have a clear core–shell structure. DMA illustrated that the compatibility between P(BA–EHA) and PVC was well improved. With an increasing P(BA–EHA) content, the loss peak in the low‐temperature range became stronger than that of pure PVC, and the maximum values of the loss peaks gradually shifted to higher temperature. SEM showed that the fractured surface of the composite sample exhibited better toughness of the material. The notched impact strength of the material with 4.2 wt % P(BA–EHA) was 11 times that of PVC. TEM showed that P(BA–EHA) was uniformly dispersed in the PVC matrix and that the interface between the two phases was indistinct. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 643–649, 2003Keywords
This publication has 11 references indexed in Scilit:
- A tough noncombustible material prepared by grafting of poly(2‐ethylhexyl acrylate) with vinyl chlorideJournal of Applied Polymer Science, 2002
- The Effect of Technological Impact upon Patent Renewal DecisionsTechnology Analysis & Strategic Management, 1999
- Simultaneous statistical suspension copolymerization of vinyl chloride with butyl acrylate and grafting on poly(butyl acrylate)Journal of Applied Polymer Science, 1998
- Study on poly(butyl acrylate)/poly(α-methyl styrene-co-acrylate) core-shell particles as a processing aid for poly(vinyl chloride)Polymer, 1997
- A Study of Three-layered Latex Interpenetrating Polymer Networks Used as Processing Modifiers and Impact Modifiers of Thermo-plastic ResinsPolymers for Advanced Technologies, 1996
- Toughening behaviour of rubber-modified thermoplastic polymers involving very small rubber particles: 2. Rubber cavitation behaviour in poly(vinyl chloride)/methyl methacrylate-butadiene-styrene graft copolymer blendsPolymer, 1994
- Chain transfer grafting of butyl acrylate onto poly(vinyl chloride) in emulsionPolymer, 1994
- Morphology and properties of polyblend PVC/PBSMJournal of Applied Polymer Science, 1992
- Control of intrinsic brittleness and toughness of polymers and blends by chemical structure: A reviewPolymer International, 1992
- Internal stress, lattice deformation, and modulus of polymersJournal of Applied Polymer Science, 1991