Mingwang Pan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mingwang Pan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
Jinfeng Yuan
Institute of Polymer Science and Engineering; Hebei University of Technology; Tianjin 300130 P. R. China
3 shared publicationsLiucheng Zhang
Institute of Polymer Science and Engineering, Hebei University of Technology, Tianjin 300130, People's Republic of China
3 shared publicationsXudong Shi
Institute of Polymer Science and Engineering, School of Chemical Engineering, Hebei University of Technology, Tianjin, 300130, People's Republic of China
2 shared publications- Haifeng Yu
Department of Computer Science, National University of Singapore, Singapore, Singapore
1 shared publication Haiyan Hu
Institute of Polymer Science and Engineering, School of Chemical Engineering, Hebei University of Technology, Tianjin, 300130, People's Republic of China
1 shared publicationHu Haiyan
Institute of Polymer Science and Engineering, Hebei University of Technology, Tianjin 300130, China
1 shared publication
Latest Publications
- Open Access
- 3 September 2013
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 34 (17) , 1420
Macromol. Rapid Commun. 17/2013
- 3 September 2013
- Published by Wiley in Macromolecular Rapid Communications
- Vol. 34 (17) , 1420
Open AccessMacromol. Rapid Commun. 17/2013
- 28 December 2009
- Published by Wiley in Polymer Engineering & Science
- Vol. 50 (6) , 1085-1094
Synthesis and characterization of poly(butyl acrylate‐co‐ethylhexyl acrylate)/ poly(vinyl chloride)[P(BA‐EHA)/PVC] novel core‐shell modifier and its impact modification for a poly(vinyl chloride)‐based blend
Synthesis of poly(butyl acrylate‐co‐ethylhexyl acrylate)‐core/poly(vinyl chloride)‐shell [P(BA‐EHA)/PVC] used as a modifying agent of PVC via semicontinuous seeded emulsion copolymerization is reported here. Diameter distributions and morphology of the composite latex particles were characterized with the aid of particle size analyzer and transmission electron microscopy (TEM). The grafting efficiency (GE) and grafting ratio (GR) of vinyl chloride (VC) grafted onto the P(BA‐EHA) with varying content of crosslinking agent and core‐shell ratios were investigated. TEM studies indicated that the P(BA‐EHA)/PVC latex particles have core‐shell structure, and the P(BA‐EHA) rubbery particles in blending materials were uniformly dispersed in PVC matrix. Dynamic mechanical analysis (DMA) results revealed that the compatibility between the P(BA‐EHA) and the PVC matrix was significantly improved due to the presence of the P(BA‐EHA)‐grafted‐VC copolymer. The notched impact strength of the blending material with 3 wt% of rubber content was seven times that of the PVC. Linear regressions of mechanical properties as loading of the modifier were made. The resulting data of notched impact strength and elongation at break for the blending materials deviated significantly from regression lines within 3–4.5 wt% of the P(BA‐EHA) content. The PVC blends modified by the modifier exhibited good toughness and easy processability. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers
- 28 December 2009
- Published by Wiley in Polymer Engineering & Science
- Vol. 50 (6) , 1085-1094
Synthesis and characterization of poly(butyl acrylate‐co‐ethylhexyl acrylate)/ poly(vinyl chloride)[P(BA‐EHA)/PVC] novel core‐shell modifier and its impact modification for a poly(vinyl chloride)‐based blend
Synthesis of poly(butyl acrylate‐co‐ethylhexyl acrylate)‐core/poly(vinyl chloride)‐shell [P(BA‐EHA)/PVC] used as a modifying agent of PVC via semicontinuous seeded emulsion copolymerization is reported here. Diameter distributions and morphology of the composite latex particles were characterized with the aid of particle size analyzer and transmission electron microscopy (TEM). The grafting efficiency (GE) and grafting ratio (GR) of vinyl chloride (VC) grafted onto the P(BA‐EHA) with varying content of crosslinking agent and core‐shell ratios were investigated. TEM studies indicated that the P(BA‐EHA)/PVC latex particles have core‐shell structure, and the P(BA‐EHA) rubbery particles in blending materials were uniformly dispersed in PVC matrix. Dynamic mechanical analysis (DMA) results revealed that the compatibility between the P(BA‐EHA) and the PVC matrix was significantly improved due to the presence of the P(BA‐EHA)‐grafted‐VC copolymer. The notched impact strength of the blending material with 3 wt% of rubber content was seven times that of the PVC. Linear regressions of mechanical properties as loading of the modifier were made. The resulting data of notched impact strength and elongation at break for the blending materials deviated significantly from regression lines within 3–4.5 wt% of the P(BA‐EHA) content. The PVC blends modified by the modifier exhibited good toughness and easy processability. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers
- 23 November 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 95 (2) , 419-426
Rheological behavior and thermal properties of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate)‐grafted vinyl chloride resin
- 23 November 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 95 (2) , 419-426
Rheological behavior and thermal properties of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate)‐grafted vinyl chloride resin
- 29 July 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 94 (1) , 277-286
Morphology and properties of PVC/clay nanocomposites via in situ emulsion polymerization
PVC/Na+–montmorillonite (MMT) nanocomposites were prepared via a simple technique of emulsion polymerization at several different MMT clay concentrations. X‐ray diffraction and transmission electron microscopy studies revealed the formation of a mixture of intercalated and exfoliated nanostructure. Tensile testing results showed that the tensile modulus of the nanocomposites increased with the addition of clay, while the tensile strength decreased little. The notched impact strength of the nanocomposites was also improved. For systems containing clay in the range of 2.1 to 3.5 wt %, the impact strength was almost two times as large as that of pure PVC. However, those mechanical properties began to decrease with the continuously increasing amount of clay. The fracture surface of pure PVC and the nanocomposites was observed by scanning electron microscope. Thermal properties of the nanocomposites were found to increase as a result of clay incorporation. The glass transition temperatures of the PVC/clay nanocomposites were nearly identical to that of pure PVC. The Vicat softening points exhibited a progressively increasing trend with the clay content added. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 277–286, 2004
- 29 July 2004
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 94 (1) , 277-286
Morphology and properties of PVC/clay nanocomposites via in situ emulsion polymerization
PVC/Na+–montmorillonite (MMT) nanocomposites were prepared via a simple technique of emulsion polymerization at several different MMT clay concentrations. X‐ray diffraction and transmission electron microscopy studies revealed the formation of a mixture of intercalated and exfoliated nanostructure. Tensile testing results showed that the tensile modulus of the nanocomposites increased with the addition of clay, while the tensile strength decreased little. The notched impact strength of the nanocomposites was also improved. For systems containing clay in the range of 2.1 to 3.5 wt %, the impact strength was almost two times as large as that of pure PVC. However, those mechanical properties began to decrease with the continuously increasing amount of clay. The fracture surface of pure PVC and the nanocomposites was observed by scanning electron microscope. Thermal properties of the nanocomposites were found to increase as a result of clay incorporation. The glass transition temperatures of the PVC/clay nanocomposites were nearly identical to that of pure PVC. The Vicat softening points exhibited a progressively increasing trend with the clay content added. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 277–286, 2004
- 15 January 2004
- Published by Wiley in Polymer International
- Vol. 53 (2) , 225-231
Preparation and characterization of poly(vinyl chloride)/organoclay nanocomposites by in situ intercalation
In this article, poly(vinyl chloride) (PVC)–organoclay nanocomposites were prepared via in situ polymerization intercalation and melt blending intercalation, respectively. Their nanostructures were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Differences in the morphologies of the PVC hybrids prepared by in situ intercalation and melt intercalation were investigated. In addition, three kinds of organoclay were used, in order to consider the effect of the interlayer environment on intercalation. The results show that ammonium cations have a great influence on the hybrids prepared by melt intercalation, while they have no obvious effect on the nanostructures of the composites produced via in situ intercalation due to its distinctive process and its mechanism. Copyright © 2004 Society of Chemical Industry
- 15 January 2004
- Published by Wiley in Polymer International
- Vol. 53 (2) , 225-231
Preparation and characterization of poly(vinyl chloride)/organoclay nanocomposites by in situ intercalation
In this article, poly(vinyl chloride) (PVC)–organoclay nanocomposites were prepared via in situ polymerization intercalation and melt blending intercalation, respectively. Their nanostructures were characterized by X‐ray diffraction (XRD) and transmission electron microscopy (TEM). Differences in the morphologies of the PVC hybrids prepared by in situ intercalation and melt intercalation were investigated. In addition, three kinds of organoclay were used, in order to consider the effect of the interlayer environment on intercalation. The results show that ammonium cations have a great influence on the hybrids prepared by melt intercalation, while they have no obvious effect on the nanostructures of the composites produced via in situ intercalation due to its distinctive process and its mechanism. Copyright © 2004 Society of Chemical Industry
- 19 November 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (2) , 1168-1173
n‐Butyl acrylate based latex interpenetrating polymer networks used as processing modifiers and impact modifiers of poly(vinyl chloride)
- 19 November 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 91 (2) , 1168-1173
n‐Butyl acrylate based latex interpenetrating polymer networks used as processing modifiers and impact modifiers of poly(vinyl chloride)
- 12 August 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (3) , 643-649
Preparation and characterization of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) grafting of vinyl chloride resin with good impact resistance
Crosslinked poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA–EHA)] latex was synthesized by seeded emulsion polymerization. P(BA–EHA)/poly(vinyl chloride) (PVC) composite latex was prepared using P(BA–EHA) latex as the seed. The effects of the amount of P(BA–EHA) on the latex particle diameters and mechanical properties of the materials are discussed. The grafting efficiency (GE) of P(BA–EHA)‐grafted vinyl chloride (VC) in the synthesized resin was investigated, and the GE increased with an increasing P(BA–EHA)/VC ratio. The morphology of P(BA–EHA)/PVC was characterized using TEM, SEM, and DMA. TEM indicated that the particles of the P(BA–EHA)/PVC composite latex have a clear core–shell structure. DMA illustrated that the compatibility between P(BA–EHA) and PVC was well improved. With an increasing P(BA–EHA) content, the loss peak in the low‐temperature range became stronger than that of pure PVC, and the maximum values of the loss peaks gradually shifted to higher temperature. SEM showed that the fractured surface of the composite sample exhibited better toughness of the material. The notched impact strength of the material with 4.2 wt % P(BA–EHA) was 11 times that of PVC. TEM showed that P(BA–EHA) was uniformly dispersed in the PVC matrix and that the interface between the two phases was indistinct. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 643–649, 2003
- 12 August 2003
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 90 (3) , 643-649
Preparation and characterization of poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) grafting of vinyl chloride resin with good impact resistance
Crosslinked poly(butyl acrylate‐co‐2‐ethylhexyl acrylate) [P(BA–EHA)] latex was synthesized by seeded emulsion polymerization. P(BA–EHA)/poly(vinyl chloride) (PVC) composite latex was prepared using P(BA–EHA) latex as the seed. The effects of the amount of P(BA–EHA) on the latex particle diameters and mechanical properties of the materials are discussed. The grafting efficiency (GE) of P(BA–EHA)‐grafted vinyl chloride (VC) in the synthesized resin was investigated, and the GE increased with an increasing P(BA–EHA)/VC ratio. The morphology of P(BA–EHA)/PVC was characterized using TEM, SEM, and DMA. TEM indicated that the particles of the P(BA–EHA)/PVC composite latex have a clear core–shell structure. DMA illustrated that the compatibility between P(BA–EHA) and PVC was well improved. With an increasing P(BA–EHA) content, the loss peak in the low‐temperature range became stronger than that of pure PVC, and the maximum values of the loss peaks gradually shifted to higher temperature. SEM showed that the fractured surface of the composite sample exhibited better toughness of the material. The notched impact strength of the material with 4.2 wt % P(BA–EHA) was 11 times that of PVC. TEM showed that P(BA–EHA) was uniformly dispersed in the PVC matrix and that the interface between the two phases was indistinct. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 643–649, 2003