Increasing Wear Resistance of Heavy-Loaded Friction Pairs by Nanoparticles in Conventional Lubricants: A Proof of Concept
Open Access
- 11 April 2022
- journal article
- research article
- Published by MDPI AG in Lubricants
- Vol. 10 (4) , 64
Abstract
This paper provides experimental data on the effective use of a new lubricating composition, which includes industrial oil of any brand with the addition of a nanometal of the component of a friction pair, which has a lower hardness. It is shown that this composition significantly reduces the wear resistance of the rails and wheels of rolling stock during operation, prevents electrochemical corrosion of the friction pair wheel–rail and, most importantly, stabilizes the coefficient of friction at the optimum level after a relatively short operating time. The experiments were performed on the friction pair, “sample of the bandage material of the railway wheel—a sample of the rail material”, with a ratio of hardness of the bandage material (Rockwell hardness, HRC scale—35.3) to the hardness of the rail material of 1.1. Test results show that in the case of industrial lubricant, the BioRail brand, with the addition of a nanomaterial friction pair with lower wear hardness of the rail metal sample, after three hours in operation the wear was practically not observed. Moreover, the average value of the friction coefficient for three hours of operation was maintained at the level 0.25, which is optimal for the friction pair wheel–rail. Similar experiments using only the same lubricant brand showed much worse results.Keywords
This publication has 30 references indexed in Scilit:
- Tribological properties of Al2O3 nanoparticles as lubricating oil additivesCeramics International, 2014
- Mechanical properties of nanoparticles: basics and applicationsJournal of Physics D: Applied Physics, 2013
- The Effect of Nanoparticles on the Real Area of Contact, Friction, and WearJournal of Tribology, 2013
- Tribological properties of lubricant additives of Fe, Cu and Co nanoparticlesTribology International, 2013
- Wear of rails. A review of the American pressJournal of Friction and Wear, 2012
- Higher compressive strengths and the Bauschinger effect in conformally passivated copper nanopillarsActa Materialia, 2012
- CuO, ZrO2 and ZnO nanoparticles as antiwear additive in oil lubricantsWear, 2008
- Wear resistance of structural steel in lubricants bearing metal nanopowdersMetal Science and Heat Treatment, 2005
- Alloying contact zones by metallic nanopowders in sliding wearWear, 2004
- Study of friction reduction by nanocopper additives to motor oilWear, 2002