Alternative Analyzers for the Measurement of Gaseous Compounds During Type-Approval of Heavy-Duty Vehicles
Open Access
Abstract
Emissions standards describe the fuels, the procedures, and, among others, the analyzers to be used for the measurement of the different compounds during the type-approval of heavy-duty engines and vehicles. Traditionally, NOx, CO, hydrocarbons, and CO2 were the gaseous compounds measured within the Euro standard, with the later addition of CH4 and NH3. Euro 7, introduced in early 2024, expanded those compounds, requiring the measurement of N2O and HCHO. With an increasing number of molecules that need to be measured and introducing carbonless fuels, such as hydrogen, that present different requirements compared to carbon-based fuels, the test procedure needs to be updated. The performances of three laboratory-grade instruments and three portable emissions measurement systems based on Fourier-transformed infrared (FTIR) or quantum cascade laser infrared (QCL-IR) technologies were investigated while measuring from the tailpipe of a Diesel engine and a compressed natural gas (CNG) vehicle. All instruments presented good agreement when emissions of NOx, CO, CH4, NH3, N2O, HCHO, and CO2 were compared using: Z-score, F-test and two tail t-test of student. Water concentration measured by the four FTIRs was also in good agreement. Moreover, the dry emissions of CO2 and CO measured by the laboratory non-dispersive infrared (NDIR) and corrected using water were a few percentages different from those obtained using the regulated carbon-based approach. The results indicate that all the investigated systems are suitable for the measurement of the investigated gaseous compounds, including CO2 and H2O.Keywords
This publication has 45 references indexed in Scilit:
- On-road NOx and NH3 emissions measurements from in-use heavy-duty diesel and natural gas trucks in the South Coast air Basin of CaliforniaAtmospheric Environment, 2023
- Non-carbon greenhouse gas emissions for hybrid electric vehicles: three-way catalyst nitrous oxide and ammonia trade-offInternational Journal of Environmental Science and Technology, 2023
- Assessment of waste heat recovery for heavy-duty vehicles during on-road operationApplied Thermal Engineering, 2021
- Spatial variation of sources and photochemistry of formaldehyde in Wuhan, Central ChinaAtmospheric Environment, 2019
- Analysis of the high instantaneous NOx emissions from Euro 6 diesel passenger cars under real driving conditionsApplied Energy, 2019
- Methane oxidation over a honeycomb Pd-only three-way catalyst under static and periodic operationApplied Catalysis B: Environment and Energy, 2018
- A Comprehensive Evaluation of a Gaseous Portable Emissions Measurement System with a Mobile Reference LaboratoryEmission Control Science and Technology, 2016
- Intercomparison of real-time tailpipe ammonia measurements from vehicles tested over the new world-harmonized light-duty vehicle test cycle (WLTC)Environmental Science and Pollution Research, 2015
- Review of state of the art technologies of selective catalytic reduction of NOx from diesel engine exhaustApplied Thermal Engineering, 2014
- Vehicle exhaust catalysis: I. The relative importance of catalytic oxidation, steam reforming and water-gas shift reactionsCatalysis Today, 1995