Simulation Analysis of Equibiaxial Tension Tests for Rubber-like Materials
Open Access
Abstract
For rubber-like materials, there are three popular methods of equibiaxial tension available: inflation tension, equibiaxial planar tension, and radial tension. However, no studies have addressed the accuracy and comparability of these tests. In this work, we model the tension tests for a hyperelastic electroactive polymer (EAP) membrane material using finite element method (FEM) and investigate their experimental accuracy. This study also analyzes the impact of apparatus structure parameters and specimen dimensions on experimental performances. Additionally, a tensile efficiency is proposed to assess non-uniform deformation in equibiaxial planar tension and radial tension tests. The sample points for calculating deformation in inflation tensions should be taken near the top of the inflated balloon to obtain a more accurate characteristic curve; the deformation simulation range will be constrained by the material model and its parameters within a specific limit (λ ≈ 1.9); if the inflation hole size is halved, the required air pressure must be doubled to maintain equivalent stress and strain values, resulting in a reduction in half in inflation height and decreased accuracy. The equibiaxial planar tension test can enhance uniform deformation and reduce stress errors to as low as 2.1% (at λ = 4) with single-corner-point tension. For circular diaphragm specimens in radial tension tests, increasing the number of cuts and using larger punched holes results in more uniform deformation and less stress error, with a minimum value of 3.83% achieved for a specimen with 24 cuts and a 5 mm punched hole. In terms of tensile efficiency, increasing the number of tensile points in the equibiaxial planar tension test can improve it; under radial tension, increasing the number of cuts and decreasing the diameter of the punched hole on the specimen has a hedging effect. The findings of this study are valuable for accurately evaluating various equibiaxial tension methods and analyzing their precision, as well as providing sound guidance for the effective design of testing apparatus and test plans.Keywords
Funding Information
- the Doctoral Fundation of Nanjing Vocational College of Information Technology of China (YB20160201, HTL-O-21G09, 18KJA4600050, GDZB-024, 2018-016)
- the National Key Laboratory of Science and Technology on Helicopter Transmission (YB20160201, HTL-O-21G09, 18KJA4600050, GDZB-024, 2018-016)
- the Natural Science Research Projects in Jiangsu Universities of China (YB20160201, HTL-O-21G09, 18KJA4600050, GDZB-024, 2018-016)
- the High Level Talent Project of “Six Talent Peaks” in Jiangsu Province of China (YB20160201, HTL-O-21G09, 18KJA4600050, GDZB-024, 2018-016)
- the Open Project of the National Key Laboratory of Robotics of China (YB20160201, HTL-O-21G09, 18KJA4600050, GDZB-024, 2018-016)
This publication has 28 references indexed in Scilit:
- Large strain analysis of a soft polymer electromechanical sensor coupled to an arterial segmentJournal of Intelligent Material Systems and Structures, 2012
- Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methodsPolymer Testing, 2008
- Tools for multiaxial validation of behavior laws chosen for modeling hyper‐elasticity of rubber‐like materialsPolymer Engineering & Science, 2002
- Constitutive Models of Rubber Elasticity: A ReviewRubber Chemistry and Technology, 2000
- Characterization of Elastic Properties of Carbon-Black-Filled Rubber VulcanizatesRubber Chemistry and Technology, 1990
- Two-dimensional mechanical properties of rabbit skin—I. Experimental systemJournal of Biomechanics, 1974
- Large Deformation Isotropic Elasticity—On the Correlation of Theory and Experiment for Incompressible Rubberlike SolidsRubber Chemistry and Technology, 1973
- Mechanical properties of natural rubber vulcanizates in finite deformationJournal of Polymer Science Part A-2: Polymer Physics, 1970
- Large elastic deformations of thin rubber membranesInternational Journal of Engineering Science, 1967
- Application of Finite Elastic Theory to the Deformation of Rubbery MaterialsTransactions of the Society of Rheology, 1962