Design of Compact Frequency-Tuned Microstrip Balun
- 8 July 2010
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Antennas and Wireless Propagation Letters
- Vol. 9 (15361225) , 686-688
Abstract
In this letter, a compact frequency-tuned microstrip balun with a ring structure is proposed. By tuning the capacitance of varactor, the operating frequency of the balun can be tuned continuously. Also, by arranging the two loops on two layers, the difficulty in process caused by narrow gap can be avoided. Meanwhile, by introducing the lumped capacitors, the dimension of the balun is reduced greatly. The measured results indicate that the balun can operate at 620-1020 MHz when the voltage of varactor changes from 4 to 16 V. The phase difference of the two balanced ports is 180° ± 7°, and the amplitude difference is less than 0.8 dB. The realized balun has a dimension of 19.6 × 16.8 mm2, equal to λ0/25 × λ0/29 (λ0, the wavelength in vacuum at 620 MHz).Keywords
This publication has 7 references indexed in Scilit:
- A Dual-Band Balun Using Broadside-Coupled Coplanar StriplinesIEEE Transactions on Microwave Theory and Techniques, 2008
- A Tapped Stepped-Impedance Balun With Dual-Band OperationsIEEE Antennas and Wireless Propagation Letters, 2008
- A Broadband Substrate Integrated Waveguide (SIW) Planar BalunIEEE Microwave and Wireless Components Letters, 2007
- The Wideband Marchand Balun Transition Design2006
- A broadband Wilkinson balun using microstrip metamaterial linesIEEE Antennas and Wireless Propagation Letters, 2005
- Analysis and design of miniaturized lumped-distributed impedance-transforming balunsIEEE Transactions on Microwave Theory and Techniques, 2003
- A New Wide-Band BalunProceedings of the IRE, 1957